Dash lights rheostat/dimmer ?
#16
Rennlist Member
#17
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
A repeat:
Get an 8' 1x12 board. Cut a piece off that is the same length as the height from the floor to the top of the door sill. Attach to the remainder at a right angle (making an L) and brace it with something. Add padding top and/or bottom if desired. Stick the board inside the car and lay on it - much easier on older backs...
Get an 8' 1x12 board. Cut a piece off that is the same length as the height from the floor to the top of the door sill. Attach to the remainder at a right angle (making an L) and brace it with something. Add padding top and/or bottom if desired. Stick the board inside the car and lay on it - much easier on older backs...
#18
Three Wheelin'
Thread Starter
Join Date: May 2007
Location: Newcastle upon Tyne. England
Posts: 1,368
Received 78 Likes
on
42 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Also as you say, Do not remove the mounting screw, it only needs loosening enough to slide the Dimmer switch off. That little screw would be a bit of a struggle getting it back on.
The dimmer now works as intended, it,s no brighter but I now have consistent and even light.
Thank,s to everyone that helped, hope this post helps other,s
Ken
80 928 S
5 Speed
UK