SHARKS IN THE MOUNTAINS 2011 - 928 SPECIALISTS 14th Annual 928 Event - June 3rd-5th
#211
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
__________________
David Roberts
2010 Jaguar XKR Coupe - 510HP Stock - Liquid Silver Metallic
928 Owners Club Co-Founder
Rennlist 928 Forum Main Sponsor
www.928gt.com
928 Specialists on Facebook - 928Specialists
Sharks in the Mountains on Facebook - 928SITM
David Roberts
2010 Jaguar XKR Coupe - 510HP Stock - Liquid Silver Metallic
928 Owners Club Co-Founder
Rennlist 928 Forum Main Sponsor
www.928gt.com
928 Specialists on Facebook - 928Specialists
Sharks in the Mountains on Facebook - 928SITM
#218
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Have fun...just xcnld and got stuck with a flipp'n 72 hr cancellation "fee"(what happened to 24hrs?). I dont go and still get to pay for it. My own fault
#219
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#221
Rennlist Member
Travel safe and have a blast you guys. For those of us who can't make it, post lots of pictures! Thank you DR and Jeannie for this wonderful event. Eventually the Bluemax will make it.
#222
Rennlist Member
Join Date: Mar 2006
Location: Raleigh, NC
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Aarrrgggg! The good news is I will be at SITM again this year. The bad news is that the vacuum source for the HVAC solenoids and the four way vacuum line connector near the brake booster on the '91 GT have disintegrated while trying to chase down a vaccum leak to the heater valve. The center console is in pieces and the parts are in Germany! Hence, I will will have to attend in my other Porsche (with the 928 OC license plate frame that says "My Other Car Is A 928"). Please be kind!
Jerry
Jerry
#225
Rennlist Member
Here's my short-list of things to do before SITM.
Note: This is all reassembly. Everything has been cleaned or rebuilt.
I have an appt. with my muffler shop for 8am tomorrow morning.
Then off we go.....
Think I can do it?
Note: This is all reassembly. Everything has been cleaned or rebuilt.
Project Perl - Final Checklist
1. Fuel cross-over line
2. Turn over w/starter (no ign.)
3. Belt covers
4. Dist. cap & wires
5. Lace harnesses
6. Assemble PS pump and Alt. (belts)
7. Heater hose
8. Radiators & hoses (drain plug)
9. Coolant
10. Half-shafts
11. O2 sensor
12. Clutch slave
13. Removed screw from floorpan
14. Exhaust
15. Belly pan
Start car
16. Dust sheilds
17. E-brake shoes (tighten cable linkage)
18. Rotors
19. Calipers & pads (don't forget the lube)
20. Rear drop links
21. Rear markers & gaskets (new bulbs)
22. Wheel well liners
23. Wheels (clean and wax)
24. Engine x-brace
Car off lift
26. Torque hub nut (340 ft/lbs)
27. PKlutch
28. Seats
Car to muffler shop
29. Wash
30. Vacuum
1. Fuel cross-over line
2. Turn over w/starter (no ign.)
3. Belt covers
4. Dist. cap & wires
5. Lace harnesses
6. Assemble PS pump and Alt. (belts)
7. Heater hose
8. Radiators & hoses (drain plug)
9. Coolant
10. Half-shafts
11. O2 sensor
12. Clutch slave
13. Removed screw from floorpan
14. Exhaust
15. Belly pan
Start car
16. Dust sheilds
17. E-brake shoes (tighten cable linkage)
18. Rotors
19. Calipers & pads (don't forget the lube)
20. Rear drop links
21. Rear markers & gaskets (new bulbs)
22. Wheel well liners
23. Wheels (clean and wax)
24. Engine x-brace
Car off lift
26. Torque hub nut (340 ft/lbs)
27. PKlutch
28. Seats
Car to muffler shop
29. Wash
30. Vacuum
Then off we go.....
Think I can do it?