Installing Pklamp--WTF?
#31
Nordschleife Master
#32
Racer
Thread Starter
Join Date: Jul 2009
Location: Byhalia, MS
Posts: 380
Likes: 0
Received 0 Likes
on
0 Posts
Mark, I did what Constantine suggests. I used a small hammer and a prybar to move the shaft forward to the proper position. Then reinserted the rear clamp bolt and torqued it down properly. Then installed the pklamp and torqued per the specs.
It's been fine ever since. No issues.
It's been fine ever since. No issues.
Last edited by DanielD; 02-11-2013 at 10:16 PM. Reason: spelling
#33
Rennlist Member
Join Date: Jan 2003
Location: Peachtree Corners, Georgia
Posts: 833
Likes: 0
Received 42 Likes
on
29 Posts
Okay. I will go ahead and try that.
Thanks Daniel..!
Mark in Atlanta.
87 S4 Grandprixweiss Auto w/LSD (Daily Driver Since 2004).
88 S4 Silbermetallic 5 speed w/LSD (Weekends - Currently Apart).
84 S Schwarz Auto w/LSD (Sold in 2007 - Daily Driver 1997-2004).
Thanks Daniel..!
Mark in Atlanta.
87 S4 Grandprixweiss Auto w/LSD (Daily Driver Since 2004).
88 S4 Silbermetallic 5 speed w/LSD (Weekends - Currently Apart).
84 S Schwarz Auto w/LSD (Sold in 2007 - Daily Driver 1997-2004).