Installing Pklamp--WTF?
Nordschleife Master
Joined: Jun 2006
Posts: 6,297
Likes: 63
From: ɹəpun uʍop 'ʎəupʎs
Thread Starter
Racer
Joined: Jul 2009
Posts: 380
Likes: 0
From: Byhalia, MS
Mark, I did what Constantine suggests. I used a small hammer and a prybar to move the shaft forward to the proper position. Then reinserted the rear clamp bolt and torqued it down properly. Then installed the pklamp and torqued per the specs.
It's been fine ever since. No issues.
It's been fine ever since. No issues.
Last edited by DanielD; Feb 11, 2013 at 10:16 PM. Reason: spelling
Burning Brakes
Joined: Jan 2003
Posts: 876
Likes: 66
From: GA, SC, and TN
Okay. I will go ahead and try that.
Thanks Daniel..!
Mark in Atlanta.
87 S4 Grandprixweiss Auto w/LSD (Daily Driver Since 2004).
88 S4 Silbermetallic 5 speed w/LSD (Weekends - Currently Apart).
84 S Schwarz Auto w/LSD (Sold in 2007 - Daily Driver 1997-2004).
Thanks Daniel..!
Mark in Atlanta.
87 S4 Grandprixweiss Auto w/LSD (Daily Driver Since 2004).
88 S4 Silbermetallic 5 speed w/LSD (Weekends - Currently Apart).
84 S Schwarz Auto w/LSD (Sold in 2007 - Daily Driver 1997-2004).
