Old/Used Water Pumps
#1
Rennlist Member
Thread Starter
Old/Used Water Pumps
Is there anyone who buys old water pumps for rebuilding?
I have two old ones, one came off my '84, the other off a '78/'79 project motor.
Both would be good candidates for remanufacturing. I also have a newly rebuilt pump which was included in the purchase price of my car, but I never installed it because it was not a top-quality rebuit unit (pulley/impeller depths were not correct, I installed a new Laso pump instead). Any market for these, or are they scrap?
First photo is of the newly rebuilt unit, second is the old pump off my car. I don't have photos of the third.
I have two old ones, one came off my '84, the other off a '78/'79 project motor.
Both would be good candidates for remanufacturing. I also have a newly rebuilt pump which was included in the purchase price of my car, but I never installed it because it was not a top-quality rebuit unit (pulley/impeller depths were not correct, I installed a new Laso pump instead). Any market for these, or are they scrap?
First photo is of the newly rebuilt unit, second is the old pump off my car. I don't have photos of the third.
#2
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
With no one buying rebuilt water pumps due to failures there is very little market if any for old used pumps.
May be worth donating them to Ed at Perfex Manufacturing as cores for his superior "Engine Gaurdian" rebuilds.
May be worth donating them to Ed at Perfex Manufacturing as cores for his superior "Engine Gaurdian" rebuilds.
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
#7
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
More to the point the sellers have stopped selling them.
928sRus will not sell rebuilds unless the customer insists based on cost grounds and fully accepts the consequences .
IIRC 928 International does not sell rebuilds and neither does Pelican.
The purchase of a rebuild requires a core. Most have a core to return. So again no market for cores.
928sRus will not sell rebuilds unless the customer insists based on cost grounds and fully accepts the consequences .
IIRC 928 International does not sell rebuilds and neither does Pelican.
The purchase of a rebuild requires a core. Most have a core to return. So again no market for cores.
Trending Topics
#8
Former Vendor
It would be nice to have some cores to rebuild so I could have them ready to go for the people who can't wait to ship theirs to me,rebuild it and ship it back.If you want to donate them for the cause,I would pay for the shipping. Ed
#11
Pro
Join Date: Aug 2010
Location: 3rd Rock From The Sun
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
More to the point the sellers have stopped selling them.
928sRus will not sell rebuilds unless the customer insists based on cost grounds and fully accepts the consequences .
IIRC 928 International does not sell rebuilds and neither does Pelican.
The purchase of a rebuild requires a core. Most have a core to return. So again no market for cores.
928sRus will not sell rebuilds unless the customer insists based on cost grounds and fully accepts the consequences .
IIRC 928 International does not sell rebuilds and neither does Pelican.
The purchase of a rebuild requires a core. Most have a core to return. So again no market for cores.
#12
Ed, I have one from an '82 sitting on the bench in the garage, yours if you want it.
#14
Intermediate
Join Date: Jun 2008
Location: 1978 928 - Fog City, CA USA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Opelotus... "I also have a newly rebuilt pump which was included in the purchase price of my car, but I never installed it because it was not a top-quality rebuit unit (pulley/impeller depths were not correct, ..."
Can you tell me the "correct" depths of the pulley/impeller (measured in reference to what surface?)?
Thanks...
Can you tell me the "correct" depths of the pulley/impeller (measured in reference to what surface?)?
Thanks...