Cant remove $(*@?! Door Panel!
10-26-2010 | 10:42 AM
#16
Team Owner
Joined: May 2004
Posts: 28,628
Likes: 2,657
From: Philly PA
when you put the door panel back on make sure to not overtighten the lock surround use the palm of your hand to tighten it,
then make it just past snug,
check the door lock for operation and binding before and after you put the surround in place,
then also make sure to not overtighten the lock **** ,
thats why it has loctite on the screw,
make the screw just to snug and check door lock operation.
If either one of these parts are too tight then the locks will not operate properly,
and you may damage the lock actuator inside the door by forcing the mechanisim,
and or the auto locking feature may not work either
then make it just past snug,
check the door lock for operation and binding before and after you put the surround in place,
then also make sure to not overtighten the lock **** ,
thats why it has loctite on the screw,
make the screw just to snug and check door lock operation.
If either one of these parts are too tight then the locks will not operate properly,
and you may damage the lock actuator inside the door by forcing the mechanisim,
and or the auto locking feature may not work either
10-26-2010 | 11:13 AM
#17
Three Wheelin'
Joined: Mar 2010
Posts: 1,307
Likes: 3
From: Colorado Springs, CO USA
Is it just the lighting, or did you change interior colors during the refurb?
