Door Panels NEW Reproductions Available
#1
Thread Starter
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Joined: May 2002
Posts: 1,890
Likes: 276
From: Dearborn Heights, MI
Door Panels NEW Reproductions Available
UPDATE 2/9/2012
On my last order I was able to negotiate some reduced pricing with my vendors during the holidays when business was slow for them. So I figured I'd pass on the savings.
I have 10 sets left.
SALE PRICED $350 per set. Unfinished. Finished prices remain the same. See below for details.
Send me a message or email info@classic9leathershop.com
I'm having some door panels made.
They are reproductions of the originals made from 1/8 inch ABS plastic.
All mounting holes including those for the door inserts will be there.
The round speaker holes for the mid and later cars are marked for cutting but not cut out. You can cut round holes or punch you own grid of holes for the early cars.
They won't rot, warp, or tear as easily as the originals.
The small metal bracket that slips behind the door lock will have to be reused from the old panel.
Since the number ordered affects the price, I can offer them now for a lower price than what the regular retail price will be.
The prices are as follows.
Rennlist pre order price - Left or right unfinished panel $250 each, $500 per set. Regular price will be $300 each or $600 per set.
Rennlist pre order price - finished in new leather and sliverknit carpet, $400 each, $800 per set. Regular price $450 each $900 per set
Rennlist pre order price - finished in new vinyl and sliverknit carpet, $325 each $650 per set. Regular price $375 each $750 per set.
Door inserts, handles, bins, and mounting clips are NOT included.
If you want to order a set, please send a PM, call or email me. Shipping charges are additional.
I take all major credit cards, you can send me a check or I can send a Paypal invoice.
ETA is the second week in May.
I'll take orders at these prices until May 7th.
On my last order I was able to negotiate some reduced pricing with my vendors during the holidays when business was slow for them. So I figured I'd pass on the savings.
I have 10 sets left.
SALE PRICED $350 per set. Unfinished. Finished prices remain the same. See below for details.
Send me a message or email info@classic9leathershop.com
I'm having some door panels made.
They are reproductions of the originals made from 1/8 inch ABS plastic.
All mounting holes including those for the door inserts will be there.
The round speaker holes for the mid and later cars are marked for cutting but not cut out. You can cut round holes or punch you own grid of holes for the early cars.
They won't rot, warp, or tear as easily as the originals.
The small metal bracket that slips behind the door lock will have to be reused from the old panel.
Since the number ordered affects the price, I can offer them now for a lower price than what the regular retail price will be.
The prices are as follows.
Rennlist pre order price - Left or right unfinished panel $250 each, $500 per set. Regular price will be $300 each or $600 per set.
Rennlist pre order price - finished in new leather and sliverknit carpet, $400 each, $800 per set. Regular price $450 each $900 per set
Rennlist pre order price - finished in new vinyl and sliverknit carpet, $325 each $650 per set. Regular price $375 each $750 per set.
Door inserts, handles, bins, and mounting clips are NOT included.
If you want to order a set, please send a PM, call or email me. Shipping charges are additional.
I take all major credit cards, you can send me a check or I can send a Paypal invoice.
ETA is the second week in May.
I'll take orders at these prices until May 7th.
Last edited by Rob M Budd; 02-09-2012 at 01:38 PM.
The following users liked this post:
cgraner (10-25-2022)
#3
Thread Starter
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Joined: May 2002
Posts: 1,890
Likes: 276
From: Dearborn Heights, MI
#4
Rob-
I'm good for door panels right now, but there might also be a market for 1/8" ABS center console side covers made with the proper curvature (for the airbag cars '90-'95, and for the earlier version 78-89). Mine are trashed and I would bet many others' are as well. Just a thought.
I'm good for door panels right now, but there might also be a market for 1/8" ABS center console side covers made with the proper curvature (for the airbag cars '90-'95, and for the earlier version 78-89). Mine are trashed and I would bet many others' are as well. Just a thought.
Trending Topics
#8
Rob-
I'm good for door panels right now, but there might also be a market for 1/8" ABS center console side covers made with the proper curvature (for the airbag cars '90-'95, and for the earlier version 78-89). Mine are trashed and I would bet many others' are as well. Just a thought.
I'm good for door panels right now, but there might also be a market for 1/8" ABS center console side covers made with the proper curvature (for the airbag cars '90-'95, and for the earlier version 78-89). Mine are trashed and I would bet many others' are as well. Just a thought.
All the center console I see are warped at the base around the windows control. And often cracked around the radio/air control.
Just hope my bonus get in before May 7.
#10
Thread Starter
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Joined: May 2002
Posts: 1,890
Likes: 276
From: Dearborn Heights, MI
In any event, it will be a while before I can dedicate some time to it. Perhaps late summer or fall.
#11
Thread Starter
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Joined: May 2002
Posts: 1,890
Likes: 276
From: Dearborn Heights, MI
So yes, I have many customers who opt for buying the hides to be used now and later on other panels.
#12
Thread Starter
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Joined: May 2002
Posts: 1,890
Likes: 276
From: Dearborn Heights, MI
Rob-
I'm good for door panels right now, but there might also be a market for 1/8" ABS center console side covers made with the proper curvature (for the airbag cars '90-'95, and for the earlier version 78-89). Mine are trashed and I would bet many others' are as well. Just a thought.
I'm good for door panels right now, but there might also be a market for 1/8" ABS center console side covers made with the proper curvature (for the airbag cars '90-'95, and for the earlier version 78-89). Mine are trashed and I would bet many others' are as well. Just a thought.
#13
Thread Starter
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Joined: May 2002
Posts: 1,890
Likes: 276
From: Dearborn Heights, MI
Some creative plastic work can resolve some of these problems. Cyanoacrylate type adhesives work well here.
#14
Thread Starter
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Joined: May 2002
Posts: 1,890
Likes: 276
From: Dearborn Heights, MI
how much do they weigh compared do the original ones.... the reason I asked is that I could take a set of yours.... mod them with abs plastic, and make them look just like my current ones... but I'm curious regarding the weight... using epoxy and abs I could have moded mine without adding as much weight as I did with fiberglass....
Last edited by Rob M Budd; 04-24-2010 at 03:33 PM.