O-ringed oil fill lid
#1
Inventor
Rennlist Member
Rennlist Member
Thread Starter
O-ringed oil fill lid
I had two of these made for myself. A few more folks wanted one or two, so I'm going to order one run of 10.
This is a one time buy. (I'll order in about a week, another 2 weeks or so for delivery after that.)
1/2" thick, can be drilled for pipe threads, or epoxy connection(s).
Requires (not included):
(2) 6 x 1.0 x 25 - bolts
(1) 928 107 307 00 - S4 oil filler o-ring
Lids made.
(8/12 - Someone else is making a similar lid, if you need one - https://rennlist.com/forums/9782161-post38.html)
This is a one time buy. (I'll order in about a week, another 2 weeks or so for delivery after that.)
1/2" thick, can be drilled for pipe threads, or epoxy connection(s).
Requires (not included):
(2) 6 x 1.0 x 25 - bolts
(1) 928 107 307 00 - S4 oil filler o-ring
Lids made.
(8/12 - Someone else is making a similar lid, if you need one - https://rennlist.com/forums/9782161-post38.html)
Last edited by PorKen; 08-21-2012 at 05:57 PM.
#2
Inventor
Rennlist Member
Rennlist Member
Thread Starter
This is what I'm doing with mine.
Serving suggestion - elbow not included.
Serving suggestion - elbow not included.
#3
Rennlist Member
Ken,
Any chance your shop will hog out the center for additional $$? I still want to run John's scrubber, but need more clearance for proper breathing. I may still order and mill it down here locally, but it sure would be nice to have the option.
Thanks
Hans
Any chance your shop will hog out the center for additional $$? I still want to run John's scrubber, but need more clearance for proper breathing. I may still order and mill it down here locally, but it sure would be nice to have the option.
Thanks
Hans
#4
Inventor
Rennlist Member
Rennlist Member
Thread Starter
Hans - sorry, no special machining.
I want to keep the whole order as simple as possible.
I want to keep the whole order as simple as possible.
#5
Paid Ken.
Trending Topics
#9
Rennlist Member
Join Date: Jul 2002
Location: Deep in the Heart of Texas!
Posts: 3,269
Likes: 0
Received 5 Likes
on
4 Posts
Hope this isn't in poor taste, but I happen to have a leftover (1) 928 107 307 00 - S4 oil filler o-ring ... PM if you need one for your filler cover and help me get my spring cleaning underway ...
#10
Inventor
Rennlist Member
Rennlist Member
Thread Starter
I have enough payments to order 10 (thanks y'all), so I will get the process started.
(I may have them back in time for some of them to be smuggled over the Canadian border at the end of the month. )
#12
Inventor
Rennlist Member
Rennlist Member
Thread Starter
Hans - right now, there are still (4) of the 10 unclaimed.
I will updated the count in the first post as orders come in.
I will updated the count in the first post as orders come in.