Spark Plug Set for S4 where to go?
#1
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm past due for a spark plug set for my S4 and need one bad. Are there any cheap good quality sets out there? My wallets really hurtin already from doing a torque tube, intake refresh, powder coat, and numerious other things so looking for a deal on this. I'm shocked that spark plug wires are this expensive... holy cow!
#3
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Roger Tyson is my Leader.......
Dan, there's been some discussion around here about plugs.........(yeah, really).
In any event, the best is probably what the car was designed for.
Copper.
Bitch to find here in the great white north, but it's the "Bosch Super Plus" it what I'm running now, based on a lot of reading.
PM Rog. I'm sure he's got lots.
Wires - same deal.
Depends on your budget, but it's one place I personally wouldn't go cheap. Several decades of experience says that you should use the best available.
(Consider what you're driving here......it ain't no Chevy).
And for those who are about to take offence to that, I'm historically (really historic) a Pontiac guy so bite me......
Dan, there's been some discussion around here about plugs.........(yeah, really).
In any event, the best is probably what the car was designed for.
Copper.
Bitch to find here in the great white north, but it's the "Bosch Super Plus" it what I'm running now, based on a lot of reading.
PM Rog. I'm sure he's got lots.
Wires - same deal.
Depends on your budget, but it's one place I personally wouldn't go cheap. Several decades of experience says that you should use the best available.
(Consider what you're driving here......it ain't no Chevy).
And for those who are about to take offence to that, I'm historically (really historic) a Pontiac guy so bite me......
#4
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
ok ....this thread caught my eye..
I 'm looking for a great set of spark plug wires!
Imre aka ImooOO.. is doing a major over haul on my new shark and I've been shoppin around but I only want the best so I would love a little expert advice from the Veterans here.......hmmmm maybe I should just ask Imre?![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Thanks guys in advance oove to here your opinions....
Marc
73 914
78 911
83 911 sc
89 928 finally!
I 'm looking for a great set of spark plug wires!
Imre aka ImooOO.. is doing a major over haul on my new shark and I've been shoppin around but I only want the best so I would love a little expert advice from the Veterans here.......hmmmm maybe I should just ask Imre?
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Thanks guys in advance oove to here your opinions....
Marc
73 914
78 911
83 911 sc
89 928 finally!
Marc,
Imre is your best resource at this point.....
#6
Team Owner
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
From your post I am not sure if you want spark plugs OR spark plug wires??
Best bet is the WR6DC / WR7DC copper tip Bosch plugs
Look for a slightly used set of good Beru wires, a new set is 400.00 but in the grand scheme of things will probably last another 20 years or so, there are also wire sets where you can use your old ends.
Pesonally I would look for the Beru complete set
Best bet is the WR6DC / WR7DC copper tip Bosch plugs
Look for a slightly used set of good Beru wires, a new set is 400.00 but in the grand scheme of things will probably last another 20 years or so, there are also wire sets where you can use your old ends.
Pesonally I would look for the Beru complete set
Last edited by Mrmerlin; 10-29-2009 at 09:53 AM.
#7
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Looking for a spark plug wire set. Looking for a complete set new with ends. Called autozone and they want 252.99 for a set. Anyone have luck with them?
Just to clarify at the bottom of my first post its says spark plug wires as well. Sorry for the confusion.
Just to clarify at the bottom of my first post its says spark plug wires as well. Sorry for the confusion.
Trending Topics
#8
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Roger Tyson is my Leader.......
Dan, there's been some discussion around here about plugs.........(yeah, really).
In any event, the best is probably what the car was designed for.
Copper.
Bitch to find here in the great white north, but it's the "Bosch Super Plus" it what I'm running now, based on a lot of reading.
PM Rog. I'm sure he's got lots.
Wires - same deal.
Depends on your budget, but it's one place I personally wouldn't go cheap. Several decades of experience says that you should use the best available.
(Consider what you're driving here......it ain't no Chevy).
And for those who are about to take offence to that, I'm historically (really historic) a Pontiac guy so bite me......
Dan, there's been some discussion around here about plugs.........(yeah, really).
In any event, the best is probably what the car was designed for.
Copper.
Bitch to find here in the great white north, but it's the "Bosch Super Plus" it what I'm running now, based on a lot of reading.
PM Rog. I'm sure he's got lots.
Wires - same deal.
Depends on your budget, but it's one place I personally wouldn't go cheap. Several decades of experience says that you should use the best available.
(Consider what you're driving here......it ain't no Chevy).
And for those who are about to take offence to that, I'm historically (really historic) a Pontiac guy so bite me......
Guy on the other end at Autozone said this price has so be incorrect let me check with my manager! lol
#9
Captain Obvious
Super User
Super User
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Marc,
You spartk plug wires look really good. I'll do a water bottle spray test later, just to make sure, but the wires are nice and soflt and look fine to me.
You spartk plug wires look really good. I'll do a water bottle spray test later, just to make sure, but the wires are nice and soflt and look fine to me.
#10
Rest in Peace
Rennlist Member
Rennlist Member
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
From your post I am not sure if you want spark plugs OR spark plug wires??
Best bet is the WR6DC / WR7DC copper tip Bosch plugs
Look for a slightly used set of good Beru wires, a new set is 400.00 but in the grand scheme of things will probably last another 20 years or so, there are also wire sets where you can use your old ends.
Pesonally I would look for the Beru complete set
Best bet is the WR6DC / WR7DC copper tip Bosch plugs
Look for a slightly used set of good Beru wires, a new set is 400.00 but in the grand scheme of things will probably last another 20 years or so, there are also wire sets where you can use your old ends.
Pesonally I would look for the Beru complete set
#14
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have always had good luck with Magnecor wires. They have even built me a set of custom wires for my 32v AMG (no available spare parts - 100% handbuilt custom engine) and the price was still cheap, IIRC $250 shipped.
They are not glamorous looking like my Nology set (slave to fashion), but they are a very high quality product. I would recomend them any day: http://www.magnecor.com
They are not glamorous looking like my Nology set (slave to fashion), but they are a very high quality product. I would recomend them any day: http://www.magnecor.com
#15
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
$295 for STi wires and $395 for Beru, Roger said the cheaper ones were just as good as the Beru so I went with the cheaper ones. I have spent lots of money lately with him and he hasn't steered me wrong yet.
Did your magnecor's come with the plastic spacers like the factory ones did so you can mount them to the valve covers?
Did your magnecor's come with the plastic spacers like the factory ones did so you can mount them to the valve covers?