Engine Number Decode
05-28-2009 | 03:26 PM
#16
Thread Starter
Advanced
Joined: May 2009
Posts: 69
Likes: 0
From: 1981 Euro 928 S
Did that an indeed it came out to an S engine. I'm in the process of swapping out parts from another engine I have which is a M28-09 which is a regular 928 engine. My understanding is that the crank is the same...are the con rods also the same ?
05-28-2009 | 03:38 PM
#17
Drifting
Joined: Nov 2006
Posts: 2,973
Likes: 1
From: Farmington Hills, MI
Ben,
Yes only the bare block. It had been bored to 103.8 when I got it and still needed to be nicksiled. It was supposedly used at some point for a total of
3K miles (total from new) in a car then removed to be turned into a stroker
project that got canceled, thats where I came in..
It now has a 108.86 bore X 93.98 stroke
Yes only the bare block. It had been bored to 103.8 when I got it and still needed to be nicksiled. It was supposedly used at some point for a total of
3K miles (total from new) in a car then removed to be turned into a stroker
project that got canceled, thats where I came in..
It now has a 108.86 bore X 93.98 stroke
