928M top cross brace
#17
Three Wheelin'
Thread Starter
#18
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
installed it , ofcourse i have only to clear the carbs ....with OEM stuff it could be another story... , don't know if it helps alot, but it sure doesn't weight that much extra ![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![](http://www.vette.be/crossbrace1.jpg)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![](http://www.vette.be/crossbrace1.jpg)
![](http://www.vette.be/crossbrace2.jpg)
#19
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
looks good
interesting hearing someone with a 928 saying "I just need to clear the carbs"
Q: Did you re-weld the bar to the end caps on the stock bar from Carl? Or is that how that bar was sent to you? From the pic, the welds of the standard bar to end pieces look messy honestly, the welds from the additions you made however look much cleaner so i am kind confused?
Im looking specifically at this pic below
interesting hearing someone with a 928 saying "I just need to clear the carbs"
Q: Did you re-weld the bar to the end caps on the stock bar from Carl? Or is that how that bar was sent to you? From the pic, the welds of the standard bar to end pieces look messy honestly, the welds from the additions you made however look much cleaner so i am kind confused?
Im looking specifically at this pic below
#20
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
looks good
interesting hearing someone with a 928 saying "I just need to clear the carbs"
Q: Did you re-weld the bar to the end caps on the stock bar from Carl? Or is that how that bar was sent to you? From the pic, the welds of the standard bar to end pieces look messy honestly, the welds from the additions you made however look much cleaner so i am kind confused?
Im looking specifically at this pic below
interesting hearing someone with a 928 saying "I just need to clear the carbs"
Q: Did you re-weld the bar to the end caps on the stock bar from Carl? Or is that how that bar was sent to you? From the pic, the welds of the standard bar to end pieces look messy honestly, the welds from the additions you made however look much cleaner so i am kind confused?
Im looking specifically at this pic below
1) i have "all" certified welders in my company, some are rather "good" with aluminum... i can honestly accept that Carl don't pay such "expensive" certified welder to make those cross braces... which would again reflect in the end price... them quality is more than acceptable.
2) what we weld here are about the same plate thickness, so equal heating, good flowing of the weld seam... the end pieces are massive aluminium, i can imagine that is just a bit more difficult to weld against a hollow tube and creating also such nice weld appearance.
Nevertheless, aluminium welds are always a bit "brute" in comparison with, for example , stainless steel .
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
#21
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
here's my man welding the rear hatch :
![](http://vette.be/928/20080426/IMG_2441.jpg)
![](http://vette.be/928/20080426/IMG_2441.jpg)
![](http://vette.be/928/20080426/IMG_2443.jpg)
#22
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Barry, that bar looks awfully close to the distributor advance pot. Is there room to swing the distributor over its range of adjustment? Is there room for the engine to rotate under torque without banging the advance pot against the bar?
#23
Instructor
Join Date: Dec 2007
Location: Gothenburg, Sweden
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
#24
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I recently saw another 928 that had this kind of hatch, but i dont see the benefit.
From the profile it looks the same so design really isnt changed. and you loose all the functionality of the hatch itself and probably most of the visibility. Also i would think the rear 3/4 windows are a little odd now as they really now only look into the interior panels and a speaker.....i guess you did it to be different, but im not too sure i understand this mod.
I remember RUF did this to a Cayman and the car itself was awesome but for the rear hatch (which was similiar to this) but i think they did it just for the sake of modifying almost.
regardless, it looks like your shop there does very nice work and im sure it will turn out to be very well done. Just curious why you choose to do this?
#25
Three Wheelin'
Join Date: Jan 2007
Location: not where you think I am
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Two others with this same type suspension bar support addition:
Tom Falkenburg's big bird car, and Louie Ott's car
perhaps they too can add to the discussion.
this mod, in addition to Carl's lower support bar, probably adds to the stiffening beyond what most "street "928's need, but what "race" 928's could take advantage of.
As to the hatch mod above, Dodge/Plymouth did away with the "tunnel" over thirty years ago with the Charger 500, Charger Daytona, and Roadrunner Superbirds......the tunnel was a aerodynamic nightmare at 200 mph, and filling it did away with making the rear end "light"---reducing lift. Daytona and Superbirds the received the high wings to further add down force.
Porsche did not put a tunnel on the 928 for a reason.
--Russ
Tom Falkenburg's big bird car, and Louie Ott's car
perhaps they too can add to the discussion.
this mod, in addition to Carl's lower support bar, probably adds to the stiffening beyond what most "street "928's need, but what "race" 928's could take advantage of.
As to the hatch mod above, Dodge/Plymouth did away with the "tunnel" over thirty years ago with the Charger 500, Charger Daytona, and Roadrunner Superbirds......the tunnel was a aerodynamic nightmare at 200 mph, and filling it did away with making the rear end "light"---reducing lift. Daytona and Superbirds the received the high wings to further add down force.
Porsche did not put a tunnel on the 928 for a reason.
--Russ
Last edited by largecar379; 09-12-2009 at 05:06 PM.
#26
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here is another similar one.
https://rennlist.com/forums/attachme...1&d=1231712799
https://rennlist.com/forums/attachme...1&d=1231712799
Last edited by Louie928; 06-13-2013 at 05:13 PM.
#27
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![Stick Out Tongue](https://rennlist.com/forums/images/smilies/tongue.gif)
http://www.musclecarclub.com/musclec...-history.shtml
On both models, the spoiler was two feet high so that the owner could open the trunk.
#28
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
You do know the height of the wing is so the trunk still opens. ![Stick Out Tongue](https://rennlist.com/forums/images/smilies/tongue.gif)
http://www.musclecarclub.com/musclec...-history.shtml
On both models, the spoiler was two feet high so that the owner could open the trunk.
![Stick Out Tongue](https://rennlist.com/forums/images/smilies/tongue.gif)
http://www.musclecarclub.com/musclec...-history.shtml
On both models, the spoiler was two feet high so that the owner could open the trunk.
![Mad](https://rennlist.com/forums/images/smilies/mad.gif)
#29
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
the hatch i made was a idea as i had seen on a Strosek ... and to be my "personal" touch
...i just like it ,"mid engine" look ?
Ok, i had the means easely, it's bolted in , so i can replace it by a Lexan window in no time....as the weight isn't a great advantage : it's about 9 kgs , the OEM glass is around 11 kgs.... so no much profit.But it's on the rear ...![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
Now "lift" from it ? On the tracks i'm gonne run with the 928 , i don't get max speeds beyond 200 km/h .( and i like it that way
)
I must be addicted to that look : have a oldtimer corvette '70 and my daily is a beemer 650 convertible ....
Without beeing "rude" to the 928 design, i found the rear window a bit "large"... also "afraid" from the heat input by sunshine...
some pics :
![](http://www.vette.be/hatch1.jpg)
![](http://www.vette.be/hatch2.jpg)
![](http://www.vette.be/hatch3.jpg)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
Ok, i had the means easely, it's bolted in , so i can replace it by a Lexan window in no time....as the weight isn't a great advantage : it's about 9 kgs , the OEM glass is around 11 kgs.... so no much profit.But it's on the rear ...
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
Now "lift" from it ? On the tracks i'm gonne run with the 928 , i don't get max speeds beyond 200 km/h .( and i like it that way
![Embarrassment](https://rennlist.com/forums/images/smilies/redface.gif)
I must be addicted to that look : have a oldtimer corvette '70 and my daily is a beemer 650 convertible ....
Without beeing "rude" to the 928 design, i found the rear window a bit "large"... also "afraid" from the heat input by sunshine...
some pics :
![](http://www.vette.be/hatch1.jpg)
![](http://www.vette.be/hatch2.jpg)
![](http://www.vette.be/hatch3.jpg)
![](http://www.vette.be/hatch4.jpg)