Blower kit on ebay.
#1
Rennlist Member
Thread Starter
Blower kit on ebay.
http://cgi.ebay.com/ebaymotors/_Car-...=p4506.c0.m245
Looks like a huge project. Is this an early supermodel kit?
Looks like a huge project. Is this an early supermodel kit?
#4
Inventor
Rennlist Member
Rennlist Member
The manifold looks like it started out on some other engine? Chevy?
http://cgi.ebay.com/ebaymotors/ws/eB...m=130262511597
http://cgi.ebay.com/ebaymotors/ws/eB...m=130262511597
#6
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
I'm going to take a wild guess you are talking about this monstrosity. Haven't seen pics of this setup in a while.
http://cgi.ebay.com/ebaymotors/_Car-...=p4506.c0.m245
You would be 1,000 times better off buying a kit from one of our vendors. This looks like a train wreck.
http://cgi.ebay.com/ebaymotors/_Car-...=p4506.c0.m245
You would be 1,000 times better off buying a kit from one of our vendors. This looks like a train wreck.
Trending Topics
#9
Rennlist Member
I looked at this last night. Its a cambden supercharger. It would take a lot to get this functional. Belt, rising rate fuel pressure regulator, PCV/ISV modifications, intake tubing, blow off valve, air filter, oil supply/return hoses ect. ect.
I would also be leary of the actual condition of the supercharger itself. Looks like its been put to good use for a while.
I would also be leary of the actual condition of the supercharger itself. Looks like its been put to good use for a while.
#13
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Very old design roots type blower and running wet....the injectors blow into the compressor rather than into the intake ports....that creates all kinds of potential issues. And we KNOW that if it fits a two valve it will not fit a 4 valve ! one or the other !