*** Detroit Tech Session***
Thread Starter
928 Engine Re-Re-Rebuild Specialist
Rennlist Member
Rennlist Member
Joined: Oct 2001
Posts: 7,972
Likes: 34
From: Brighton, MI
*** Detroit Tech Session***
Randy: Can you make this one sticky for the week?
Munk's Motors is offering to put a few sharks up on the rack at this Saturday's tech session. Beside me, who's interested in getting some free wrenching for their shark?
Munk's made an announcement about the tech session at last Friday's PCA meeting that it's open to both 928 owners and folks just plain curious about 928s.
If you DO want your car up on the rack, let's try to get a variety of models up in case there's a flood of interest. We should try to get at least one of each. I've got my hand in the air for an '85 S. <img src="graemlins/wave.gif" border="0" alt="[byebye]" />
Munk's Motors is offering to put a few sharks up on the rack at this Saturday's tech session. Beside me, who's interested in getting some free wrenching for their shark?
Munk's made an announcement about the tech session at last Friday's PCA meeting that it's open to both 928 owners and folks just plain curious about 928s.
If you DO want your car up on the rack, let's try to get a variety of models up in case there's a flood of interest. We should try to get at least one of each. I've got my hand in the air for an '85 S. <img src="graemlins/wave.gif" border="0" alt="[byebye]" />
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Jun 2000
Posts: 40,491
Likes: 139
From: Insane Diego, California
Dave, glad to see that the Detroit area owners are becoming a cohesive force, with the continued assistance from the Rennlist 928 Forum.
Perhaps, in addition to forum postings, you might consider creating an email listing for your group to use for announcements such as this.
BTW - have you considered Rennlist Membership? It has its privileges. <img src="graemlins/wave.gif" border="0" alt="[byebye]" />
Perhaps, in addition to forum postings, you might consider creating an email listing for your group to use for announcements such as this.
BTW - have you considered Rennlist Membership? It has its privileges. <img src="graemlins/wave.gif" border="0" alt="[byebye]" />
Thread Starter
928 Engine Re-Re-Rebuild Specialist
Rennlist Member
Rennlist Member
Joined: Oct 2001
Posts: 7,972
Likes: 34
From: Brighton, MI
Randy.....I have now submitted my membership application!
As for your suggestion for a mailing list, we'll organize one after this weekend's event. We needed to publicize on this list to get the ball rolling. When I got my shark in 2001, Dennis and I only knew of about 5 or so other sharks. That number has grown to over 30! (The area 911 crowd is beginning to notice....shhh!)
As for your suggestion for a mailing list, we'll organize one after this weekend's event. We needed to publicize on this list to get the ball rolling. When I got my shark in 2001, Dennis and I only knew of about 5 or so other sharks. That number has grown to over 30! (The area 911 crowd is beginning to notice....shhh!)
Supercharged
Rennlist Member
Rennlist Member
Joined: May 2002
Posts: 18,926
Likes: 88
From: Back in Michigan - Full time!
<img src="graemlins/jumper.gif" border="0" alt="[jumper]" /> Ooohh! ME! PICK ME! <img src="graemlins/jumper.gif" border="0" alt="[jumper]" />
'82 for the lift, please!
'82 for the lift, please!
Racer
Joined: Oct 2002
Posts: 393
Likes: 0
From: Commerce, Mi
Dave,
Not knowing the numbers he will take please count me in for the lift. 86 928S with suspension mods. I dont know what modifications since they were completed prior to my purchase and the car is too low to get under and see without a lot of jacks and stands.
It would also be great if he could point out all of the ground points. I have only found three and am wanting to find the remaining 5? under the front end.
Ell
<img src="graemlins/beerchug.gif" border="0" alt="[cheers]" />
Not knowing the numbers he will take please count me in for the lift. 86 928S with suspension mods. I dont know what modifications since they were completed prior to my purchase and the car is too low to get under and see without a lot of jacks and stands.
It would also be great if he could point out all of the ground points. I have only found three and am wanting to find the remaining 5? under the front end.
Ell
<img src="graemlins/beerchug.gif" border="0" alt="[cheers]" />
Trending Topics
Addict
Rennlist Member
Rennlist Member
Joined: Aug 2001
Posts: 1,047
Likes: 1
From: Land of many Potholes, Michigan
Sounds like a good time. Does Monks know anything about our suspensions??
Anyways, I have made my decision... I am keeping this shark as a donor for a supercharger. I had one person back out of helping. I am looking for someone in the Detroit area that has or knows someone with a machine shop. That might be willing to help fabricate hardware for the install of the super charger.
John D
Anyways, I have made my decision... I am keeping this shark as a donor for a supercharger. I had one person back out of helping. I am looking for someone in the Detroit area that has or knows someone with a machine shop. That might be willing to help fabricate hardware for the install of the super charger.
John D
Thread Starter
928 Engine Re-Re-Rebuild Specialist
Rennlist Member
Rennlist Member
Joined: Oct 2001
Posts: 7,972
Likes: 34
From: Brighton, MI
kgrimshaw:
Ultimately it's up to Munk's how many they want to lift. I'm guessing we can get quite a few up in the 2-3 hours available. Not many have asked here so far, so I don't see a need for a limit any more.
Dennis, any thoughts on what Munk's is planning?
Ultimately it's up to Munk's how many they want to lift. I'm guessing we can get quite a few up in the 2-3 hours available. Not many have asked here so far, so I don't see a need for a limit any more.
Dennis, any thoughts on what Munk's is planning?