a couple of quick questions...
03-16-2008, 08:09 PM
#17
Drifting
the hole that is pointed to in the first pic is not for the mount screw of the elbow of the throttle body - that mount screw is further towards the back of the V (at least on 86's - I'm in there right now, and one of the attachement points is the bottom screw/bolt). I have that same unused hole in my V floor at that same place. Not sure what it's for. What are those sensors? I don't have them on my engine? Something added for the post 86?
03-16-2008, 11:44 PM
#19
Burning Brakes
Join Date: Oct 2004
Location: Santa Rosa Beach, FL
Posts: 977
Likes: 0
Received 0 Likes
on
0 Posts
Glad I could help.
I was really worried there for a minute. When I went in the box and found the
pulley part I couldn't think for the life of me what went there. I even checked David Chamberland's write up that has a picture of it and just could not figure it out until I found the diagram.
Good luck of the rest of it, my car is now in 1000 or more pieces.
Motor out
tranny out
rear end out
you name it, its apart!
I was really worried there for a minute. When I went in the box and found the
pulley part I couldn't think for the life of me what went there. I even checked David Chamberland's write up that has a picture of it and just could not figure it out until I found the diagram.
Good luck of the rest of it, my car is now in 1000 or more pieces.
Motor out
tranny out
rear end out
you name it, its apart!