RAL Turbo P Split Rims
#3
Rennlist Member
RH makes a 3.2 Turbo style 3 piece. The RAL is a two piece. The RAL's on the GTS that Russel links to are 19's. Mine are 18's
#5
Rennlist Member
Thanks, Russell. I really like the look of these, and I held out a long time to get them. They're aggressive looking but still have a little of the classic Turbo 3.6 look to them.
The only thing that I'd change would be the little ridge around the edges of each spoke. They're pronounced on the front wheel in my pic. I'd prefer a smooth spoke, a la the 3.6 Turbo or Speedlines.
The only thing that I'd change would be the little ridge around the edges of each spoke. They're pronounced on the front wheel in my pic. I'd prefer a smooth spoke, a la the 3.6 Turbo or Speedlines.
#6
Here's of pic of the wheels I think you are talking about. Smooth edge more like the factory cup/turbo wheel. So let me know when you're ready to change to these, and I'll take the old ones off your hands!
#7
On the Radar
Rennlist Member
Rennlist Member
I have really nice set of RH wheels.
Front 18x8 et49
Rear 18x9.5 et 52
No tires or center caps.
Factory caps fit without any problem.
$1500+ shipped
Front 18x8 et49
Rear 18x9.5 et 52
No tires or center caps.
Factory caps fit without any problem.
$1500+ shipped
Trending Topics
#9
On the Radar
Rennlist Member
Rennlist Member
#10
Rennlist Member
Russell, I do prefer the flatter spoke design of those (3.6), however I prefer the bolts between the spokes only, like they are on mine (RAL).
I also prefer the 2 piece cost of the RAL over the 3 piece cost of the T 3.6
I also prefer the 2 piece cost of the RAL over the 3 piece cost of the T 3.6
#12
#14
Rennlist Member
Those are nice and would look great on any Porsche - unfortunately the front offsets aren't optimal for our cars. The fit/handling characteristics would suffer from not enough offset (10mm+ shy).