"Constantine" Clamp - Fix your TBF & Flex Plate Concerns
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Jan 2003
Posts: 16,948
Likes: 1,058
From: Double Oak, TX
"Constantine" Clamp - Fix your TBF & Flex Plate Concerns
928sRus is proud to offer the "Constantine" Clamp for sale.
Developed by a 928 Owner & Engineer to resolve the Thrust Bearing failures we experiance on our cars.
"Stops Drive Shaft Pull Out that leads to TBF"
"Can be Re-Used indefinitely without loss of Clamping Force"
"Calms Flex Plate Shudder reducing felt driveline Vibrations"
"Can be installed in any year 928 with no Modifications"
"Proudly made in The USA"
For more information and photographs contact Roger@928sRus.com
SPECIAL PRICE FOR the REST OF FEBRUARY -------- $450 each
10 in Stock and ready to ship today.
Developed by a 928 Owner & Engineer to resolve the Thrust Bearing failures we experiance on our cars.
"Stops Drive Shaft Pull Out that leads to TBF"
"Can be Re-Used indefinitely without loss of Clamping Force"
"Calms Flex Plate Shudder reducing felt driveline Vibrations"
"Can be installed in any year 928 with no Modifications"
"Proudly made in The USA"
For more information and photographs contact Roger@928sRus.com
SPECIAL PRICE FOR the REST OF FEBRUARY -------- $450 each
10 in Stock and ready to ship today.
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Last edited by ROG100; Feb 20, 2008 at 10:49 AM.
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Jan 2003
Posts: 16,948
Likes: 1,058
From: Double Oak, TX
That's the baby.
I have plenty of pictures but they are to large for Rennlist.
I will reduce them when I have time - to busy packing and shipping Constantine Clamps 8>)
I have plenty of pictures but they are to large for Rennlist.
I will reduce them when I have time - to busy packing and shipping Constantine Clamps 8>)
Trending Topics
Drifting
Joined: Sep 2004
Posts: 2,044
Likes: 1
From: Live Music Capital of the World - Austin, Texas
Talk about a beefy upgrade... Nickname? The Agnew clamp! The original "AGGNW (Ain't Gonna Go No Where)" Clamp.
If I only had the money right now, Roger...
Another great contribution. Thanks.
If I only had the money right now, Roger...
Another great contribution. Thanks.
Rennlist Stories
The Best Porsche Posts for Porsche Enthusiasts
Genius Porsche-Themed Gifts That'll Make Any Dad or Grad Smile
Joe Kucinski
10 Used Porsches Are Selling for Way Too Cheap
Joe Kucinski
Tuner Is Converting Porsche 911s Into Shooting Brakes
Verdad Gallardo
This Coachbuilt Creation Is A Modern Take on the Legendary Porsche 917
Verdad Gallardo
Is This Convertible Cayenne A Steal, Or A Returnless Investment?
Verdad Gallardo
10 Best Non-Flat Six Porsches You Can Buy For Under $100K
Joe Kucinski
Porsche's Top 5 Most Questionable Naming Decisions
Verdad Gallardo
Pogea Racing's 964 Porsche 911 Reimagination Stands Out in a Crowded Field
Verdad Gallardo
6 Convertible Top MYTHS Most People Don't Understand!
Michael S. Palmer
Race Director
Joined: Sep 2004
Posts: 16,271
Likes: 82
From: Stockton, CA
If I remember correctly (iffy at best) you have to move the TT back quite a bit to install it.....Maybe just unhooking the tranny and sliding it back would be enough....but once its done that it.....never gotta mess with it again!!
Rennlist Member
Joined: Feb 2002
Posts: 1,240
Likes: 38
From: Allentown, PA
Simple to Install
Simple install, just drop your car off the Steve Cattaneo like I did.
Here is link the thread where Steve posted picture of the clamp after I dropped off the car for trans rebuild and clamp install:
https://rennlist.com/forums/928-forum/411012-kudos-to-constantine.html
Here is link the thread where Steve posted picture of the clamp after I dropped off the car for trans rebuild and clamp install:
https://rennlist.com/forums/928-forum/411012-kudos-to-constantine.html
Rennlist Member
Joined: Feb 2002
Posts: 7,060
Likes: 42
From: Cambridge England
Simple install, just drop your car off the Steve Cattaneo like I did.
Here is link the thread where Steve posted picture of the clamp after I dropped off the car for trans rebuild and clamp install:
https://rennlist.com/forums/showthread.php?t=411012
Here is link the thread where Steve posted picture of the clamp after I dropped off the car for trans rebuild and clamp install:
https://rennlist.com/forums/showthread.php?t=411012
OK, no problem - I'll ship my car over the pond ..
Any step by step install write ups and/or pics ?
Rennlist Member
Joined: Feb 2002
Posts: 7,060
Likes: 42
From: Cambridge England
Rennlist Member
Joined: Feb 2002
Posts: 1,240
Likes: 38
From: Allentown, PA
John,
I have the instructions for the install that Constantine included with the clamp. When I get home from a business trip I will scan them and can send the instructions to you. Send me a PM with your email address.
Glen
I have the instructions for the install that Constantine included with the clamp. When I get home from a business trip I will scan them and can send the instructions to you. Send me a PM with your email address.
Glen