G Tech readings
Thread Starter
Addict
Rennlist Member
Rennlist Member
Joined: Jun 2002
Posts: 3,322
Likes: 32
G Tech readings
Guys I know a few of you have G Techs so I would be curious as to what results you guys have achieved? How about, 0 - 60 mph time in roughly 5.45 seconds.
Last edited by slate blue; May 19, 2012 at 10:40 AM. Reason: Accuracy
Supercharged
Rennlist Member
Rennlist Member
Joined: May 2002
Posts: 18,926
Likes: 88
From: Back in Michigan - Full time!
Try this thread... 
Edit: https://rennlist.com/forums/928-forum/346823-official-928-dyno-and-performance-bragging-thread.html
Edit: https://rennlist.com/forums/928-forum/346823-official-928-dyno-and-performance-bragging-thread.html
Supercharged
Rennlist Member
Rennlist Member
Joined: May 2002
Posts: 18,926
Likes: 88
From: Back in Michigan - Full time!
110 trap speed is pretty good. If you're NA the I doubt you get much better. The SCer/nitrous/turbo helps with launch. If you can, post your file or send it to me at andrewmolson "at" yahoo.com. I'll put up the comparison.
Captain Obvious
Super User
Super User
Joined: Aug 2003
Posts: 22,846
Likes: 348
From: Cambridge, Ontario, Canada
Having a little sheel spin at launch is not a bad thing. You need thsi to get the engien in the proper power band, but too much of it will roast the tires. It's a delicate balance of not enough and too much.
13.6 is really good! I was getting almost that much (13.5) just before the SC.
13.6 is really good! I was getting almost that much (13.5) just before the SC.
Thread Starter
Addict
Rennlist Member
Rennlist Member
Joined: Jun 2002
Posts: 3,322
Likes: 32
Unfortunately I cannot post the readings, I need a new computer, the cd rom is dead as such can't load the software, so I am just reading this info off the meter itself, it's a pity it would be interesting.
Greg
Greg
