Fuel Line Adaptors, Beru Plug Wire ends, wires, gauge sets, others Shtuff FS
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If you are thinking of redoing all the engine bay lines, , I have most if not all of the needed adaptors that let you hook into the Porsche hard lines and then run -8 AN line. I have both the adaptors and the -8 terminating ends for the SS line, which I have 20 feet of.
I will post prices when I figure out how much I paid for these damn things.
I have a 84 gauge set, good shape at the front, and the plastic circuit is in working shape. 70 dollars.
Beru plug ends, the ones that go into the heads. 10 dollars each, and I think I have enough for about two engines.
A set of plug wires that attach to the above. One small rip in the outside of one wire, the rest are in very good shape. 25k miles on them or so. 30 bucks
Headlight assemblies from the 86. 50 dollars for both.
I will post prices when I figure out how much I paid for these damn things.
I have a 84 gauge set, good shape at the front, and the plastic circuit is in working shape. 70 dollars.
Beru plug ends, the ones that go into the heads. 10 dollars each, and I think I have enough for about two engines.
A set of plug wires that attach to the above. One small rip in the outside of one wire, the rest are in very good shape. 25k miles on them or so. 30 bucks
Headlight assemblies from the 86. 50 dollars for both.
Last edited by BC; 07-28-2007 at 10:25 PM.