Scat Stroker Crank Balancing Act (6 cwt)
#136
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks Marc, "polish" was my term, not his. (Sorry, can't keep up with all the machinest lingo).
Stan, I'll give him your specs and see what he says.
Is this for a street motor or a race motor? RPM range?
Stan, I'll give him your specs and see what he says.
Is this for a street motor or a race motor? RPM range?
#137
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2001
Location: Wilbraham, MA
Posts: 2,758
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks Adam, this would be for a race motor.
I would only be able to speculate on the rpm range based on past experience, so if this information is needed, I will have to investigate a bit.
I appreciate your efforts.
I would only be able to speculate on the rpm range based on past experience, so if this information is needed, I will have to investigate a bit.
I appreciate your efforts.
#138
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
He is going to want to know if you are going to want the crank overbalanced if its a track motor.
I don't think its a benefit for motors spinning under factory redline, but I'm not the pro.
I don't think its a benefit for motors spinning under factory redline, but I'm not the pro.