what are the differences between 4.5l and 4.7l?
#1
Three Wheelin'
Thread Starter
Join Date: Jul 2006
Location: celtown, florida
Posts: 1,505
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
not just k or l jet. but can i take things of of an 81 4.5l and slap them on my 83 4.7l without problems? and what can i swap? like plenum and injectors and valve covers and such is what i am asking for.
#3
Three Wheelin'
Thread Starter
Join Date: Jul 2006
Location: celtown, florida
Posts: 1,505
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by 69gaugeman
200cc's
so there is no other difference. apart from k and l jet?
#4
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
some subtle difference in clutches,and the clutch system and some other components ,but the main things, no.
Originally Posted by ceedee
haha. that is exactly the answer i thought i would get...
so there is no other difference. apart from k and l jet?
so there is no other difference. apart from k and l jet?
#6
Three Wheelin'
Thread Starter
Join Date: Jul 2006
Location: celtown, florida
Posts: 1,505
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by V2Rocket_aka944
There's also bore/stroke to worry about but obviously that's not important...
most (exterior engine) parts are the same, however.
most (exterior engine) parts are the same, however.
Originally Posted by mark kibort
some subtle difference in clutches,and the clutch system and some other components ,but the main things, no.
the idea was to take off the spider and plenum and have it coated, while my car would be still driveable. then i'd put them on my other car.
i also want to do the same thing with the injectors. if it is feasable i would have them all refurbished and sell one set.