Fuel rail system assembly
10-09-2006, 06:15 PM
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jul 2002
Location: Edmonton, Ab
Posts: 2,286
Likes: 0
Received 0 Likes
on
0 Posts
Fuel rail system assembly
I have acquired one of Dave Robert's new Adjustable Fuel Pressure Regulators. In order to install it so that the adjuster is reasonably accessable on my SuperModel supercharged car, I have swapped the location of the rear fuel damper with this fuel pressure regulator. Can anyone see any potential problems associated with this change in location?
10-09-2006, 06:58 PM
#3
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Brian:
I dunno, but I left the items located as they were and I can reach the adjuster with everything still on. BUT I have Jag Eaton rather than twinscrew. I positioned the FPR so the adjuster faces up and I can get an open end on it.
I dunno, but I left the items located as they were and I can reach the adjuster with everything still on. BUT I have Jag Eaton rather than twinscrew. I positioned the FPR so the adjuster faces up and I can get an open end on it.
