Official random 928 Picture Thread (post a new 928 pic or stay out)
Track day :)
09-14-2011, 05:57 PM
#6064
Archive Gatekeeper
Rennlist Member
Rennlist Member
Junk axle stubs (for rolling a roller around), and why they're junk:
09-14-2011, 09:33 PM
#6067
Archive Gatekeeper
Rennlist Member
Rennlist Member
Jim-
That was (of course) GB's idea, he didn't like the idea of hooking up the axles to a dry transmission, and you need to have the axle nuts on there to keep the bearings squeezed with the car on the ground, so he cut up an old dead set of axles.
That was (of course) GB's idea, he didn't like the idea of hooking up the axles to a dry transmission, and you need to have the axle nuts on there to keep the bearings squeezed with the car on the ground, so he cut up an old dead set of axles.
09-15-2011, 01:55 PM
#6069
Rennlist Member
Join Date: Apr 2010
Location: Kennedale,TX a suburb of DFW
Posts: 1,045
Likes: 0
Received 3 Likes
on
3 Posts
2011 Boxstoberfest in Fredericksburg, TX
Adrienne (my wife) and I spent the weekend at the 14th Annual Boxstoberfest in Fredericksburg, TX. We had 211 attendees and all kinds of Porsches; from a couple of 356 to a "track ready" 996 Twin Turbo. Even had a Ferrari and a couple of BMW Z8s.
Here we are side by side. Adrienne was the only 928. My 79 911 SC Euro racked up 1270 km during the event. We'll be back next year, come join us! It's always that F/S/S weekend around September 10. Check out www.boxstoberfest.com for more details.
Here we are side by side. Adrienne was the only 928. My 79 911 SC Euro racked up 1270 km during the event. We'll be back next year, come join us! It's always that F/S/S weekend around September 10. Check out www.boxstoberfest.com for more details.
09-16-2011, 12:01 AM
#6071
Instructor
I gave her a wash yestreday so had to get a couple of nice angles on my gleaming beast, the GTS!
click on the image for a larger version
click on the image for a larger version
click on the image for a larger version
click on the image for a larger version
click on the image for a larger version
click on the image for a larger version
09-16-2011, 12:35 AM
#6072
Nordschleife Master
Brutal.
Here is a CO adjustment tool I picked up off of evilbay to reach the CO adjustment. Not sure it will work on the S3 motor, but will give her a try after I get me some Porken chips. Tool is 15" long and has a ball hex tip for Bosch CIS adjustment.
Here is a CO adjustment tool I picked up off of evilbay to reach the CO adjustment. Not sure it will work on the S3 motor, but will give her a try after I get me some Porken chips. Tool is 15" long and has a ball hex tip for Bosch CIS adjustment.
