S4-type Metric Fuel Line Fittings
06-27-2006 | 10:51 PM
#1
Thread Starter
Addict
Rennlist Member
Rennlist Member
Joined: Jul 2002
Posts: 2,286
Likes: 0
From: Edmonton, Ab
S4-type Metric Fuel Line Fittings
Does anyone out there have a source for these old metric fittings, aside from canabalizing old hoses? I'd like a better approach to the rear fuel hose, and different fittings would be required.
06-28-2006 | 01:59 AM
#3
Thread Starter
Addict
Rennlist Member
Rennlist Member
Joined: Jul 2002
Posts: 2,286
Likes: 0
From: Edmonton, Ab
There's precious little room back there for the originals, never mind conversion bits too.........
I'll give them a call though.........
I can't find contact info, Brendan......... you have some?
I'll give them a call though.........
I can't find contact info, Brendan......... you have some?
06-28-2006 | 02:02 AM
#4
Addict
Rennlist Member
Rennlist Member
Joined: Aug 2003
Posts: 14,242
Likes: 3
From: Canada, Eh?
Originally Posted by BrianG
There's precious little room back there for the originals, never mind conversion bits too.........
I'll give them a call though.........
I can't find contact info, Brendan......... you have some?
I'll give them a call though.........
I can't find contact info, Brendan......... you have some?
06-28-2006 | 02:31 AM
#5
Sharkaholic
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: May 2002
Posts: 5,162
Likes: 2
From: Rochester, WA
06-28-2006 | 03:26 AM
#6
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Mar 2002
Posts: 18,648
Likes: 49
From: Buckeye, AZ
I need to make a short version of the fuel line loop behind the intake, between the dampner and fuel pressure regulator. Which of the metric fittings and what kind of hose should I use?
06-28-2006 | 03:30 AM
#7
Thread Starter
Addict
Rennlist Member
Rennlist Member
Joined: Jul 2002
Posts: 2,286
Likes: 0
From: Edmonton, Ab
Originally Posted by Bill Ball
I need to make a short version of the fuel line loop behind the intake, between the dampner and fuel pressure regulator. Which of the metric fittings and what kind of hose should I use?
That's what I'm making, too.... now what size are those fittings?
M12 X 1.5 X ?
M14 X 1.5 X ?
M16 X 1.5 X ?
M18 X 1.5 X ?
M22 X 1.5 X ?
M24 X 1.5 X ?
Last edited by BrianG; 06-28-2006 at 03:49 AM.
