Anyone Interested in Group Buy of Custom Metal Pedals??
#63
Three Wheelin'
Join Date: Dec 2003
Location: Vancouver, Canada
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Glen McCartney
Hey, I am the ring leader who set this up, I want mine first!!!
Glenn
#68
Rennlist Member
Thread Starter
Installed Gas and Brake, Haven't Done Dead Pedal yet
I installed them today. Pics might not show up well, had 928 engraved in brake pedal. I have not installed the dead pedal as I will be putting something in machined pocket in dead pedal.
Here are some pics:
By the way, 0-60 times decreased by at least one second with these installed!!
Here are some pics:
By the way, 0-60 times decreased by at least one second with these installed!!
#69
Rennlist Member
Could someone post the length of the gas pedal they received? I wound up with a gas pedal that's about 7-7 1/2' long, whereas the pedal in my GTS is about 9" long.
I called Rob at Ultimate pedals about this, and he seems to think that Porsche must have changed the gas pedal for the GTS series. However, I looked in the PET, and it looks like all 928s have the same gas pedal (911.423.111.02). So I'd like to know if the earlier 928s have a gas pedal closer to 7" or 9".
Thanks,
Tom
'93 GTS Amazon Green, 5sp., GT cams
I called Rob at Ultimate pedals about this, and he seems to think that Porsche must have changed the gas pedal for the GTS series. However, I looked in the PET, and it looks like all 928s have the same gas pedal (911.423.111.02). So I'd like to know if the earlier 928s have a gas pedal closer to 7" or 9".
Thanks,
Tom
'93 GTS Amazon Green, 5sp., GT cams
#70
Rennlist Member
Thread Starter
Tom, I just measure mine and it approximately 9" long too, a 1985. When you look at the pics of myu install, I aligned the alum pedal with the top of the car pedal, the bottom of the alum pedal did not go all the way down to the bottom of the factory pedal, but went down to where the carpet/padding and floor mats were. No I amm wondering if I should get him to make it longer and go to the floor?
#71
Rennlist Member
Glen,
That tells me what I need to know. Hopefully I can get Rob straightened out.
When I talked to him, he said there should be about 1/4" clearance for the carpet, so it sounds like yours is the way it should be. The one I got leaves about 2" at the bottom, and is definitely too short.
Thanks,
Tom
That tells me what I need to know. Hopefully I can get Rob straightened out.
When I talked to him, he said there should be about 1/4" clearance for the carpet, so it sounds like yours is the way it should be. The one I got leaves about 2" at the bottom, and is definitely too short.
Thanks,
Tom
#73
Rennlist Member
Me too. I want to see pics as well and feedback as to the performance (i.e. does it take some getting used to? do they grip too much as someone else suggested earlier? etc.)
So far, they look great.
So far, they look great.
#74
4th Gear
Join Date: Feb 2004
Location: Pompano, Florida
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
We received an e-mail from a Rennlist member today, 4/24/08.
Unfortunatley the e-mail was deleted before we could respond.
Would it be possible to re-send your request.
Sorry for the hassle.
Rob
Unfortunatley the e-mail was deleted before we could respond.
Would it be possible to re-send your request.
Sorry for the hassle.
Rob