View Poll Results: Lift bar count by region
Group1 <S3
6
12.00%
Group1 S4>
5
10.00%
Group2 <S3
11
22.00%
Group2 S4>
30
60.00%
Multiple Choice Poll. Voters: 50. You may not vote on this poll
Lift bar count
#61
Inventor
Rennlist Member
Rennlist Member
Thread Starter
Mel,
The animation is an animated GIF, 325KB. Right click on it, and select 'Save Picture As...'.
The animation is an animated GIF, 325KB. Right click on it, and select 'Save Picture As...'.
#63
928 Collector
Rennlist Member
Rennlist Member
Originally Posted by PorKen
Mel,
The animation is an animated GIF, 325KB. Right click on it, and select 'Save Picture As...'.
The animation is an animated GIF, 325KB. Right click on it, and select 'Save Picture As...'.
#64
Inventor
Rennlist Member
Rennlist Member
Thread Starter
I delivered the first pair of production S4> bars, yesterday.
They fit fine, but they would require a low profile jack to get under the car (GTS) easily. I thought about it all night, and today I figured out a solution.
It should fit under even very low cars, and be even more stable as the jack is even closer to the body. I need to test fit this weekend, to check that it's not too close, but I think this is the ticket!
They fit fine, but they would require a low profile jack to get under the car (GTS) easily. I thought about it all night, and today I figured out a solution.
It should fit under even very low cars, and be even more stable as the jack is even closer to the body. I need to test fit this weekend, to check that it's not too close, but I think this is the ticket!
#65
Inventor
Rennlist Member
Rennlist Member
Thread Starter
It worked!* Now both bar designs are alpha!
New animation on first page.
__________________
*After reducing the bend some, to clear a bump in the floor.
New animation on first page.
__________________
*After reducing the bend some, to clear a bump in the floor.
#67
Rennlist Member
Well done can't wait.
BTW I always wondered what an Amazon Green GTS looked like with red vs black calipers very cool. Are those 993TT rears or stock?
BTW I always wondered what an Amazon Green GTS looked like with red vs black calipers very cool. Are those 993TT rears or stock?
#68
Inventor
Rennlist Member
Rennlist Member
Thread Starter
Ed,
I moved my operation home, after I made the jigs, so I've been spending some time setting up lighting and wiring 220V for my new bad-a$$ welder. I've also had to retrain how I was welding the bars, as this welder puts down a serious amount of steel in no time.
I should be able to deliver up there by next weekend, if nothing else pops up.
...
Anthony,
That color is cool, it changes depending on the surroundings. IIRC, those are 993TT calipers, there's a thread about it somewhere.
I moved my operation home, after I made the jigs, so I've been spending some time setting up lighting and wiring 220V for my new bad-a$$ welder. I've also had to retrain how I was welding the bars, as this welder puts down a serious amount of steel in no time.
I should be able to deliver up there by next weekend, if nothing else pops up.
...
Anthony,
That color is cool, it changes depending on the surroundings. IIRC, those are 993TT calipers, there's a thread about it somewhere.
#69
Rennlist Member
Originally Posted by PorKen
Ed,
Anthony,
That color is cool, it changes depending on the surroundings. IIRC, those are 993TT calipers, there's a thread about it somewhere.
Anthony,
That color is cool, it changes depending on the surroundings. IIRC, those are 993TT calipers, there's a thread about it somewhere.
Good Luck with the new toy, looking forward to the lift bars, just what every 928 owner needs.
#70
Advanced
Join Date: Nov 2003
Location: Sherman Oaks, California
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Glad to wait...
Ken,
I'm soooooo glad that you've redesigned and checked the lift bars for lower profile GTS use. Thank you, thank you, thank you! I'm so anxious to get my set, but am willing to wait for all your excellent designing, research, testing, etc...
Thanks again for doing this - great job!
-Joe
I'm soooooo glad that you've redesigned and checked the lift bars for lower profile GTS use. Thank you, thank you, thank you! I'm so anxious to get my set, but am willing to wait for all your excellent designing, research, testing, etc...
Thanks again for doing this - great job!
-Joe
#71
Rennlist Member
Originally Posted by PorKen
Ed,
I moved my operation home, after I made the jigs, so I've been spending some time setting up lighting and wiring 220V for my new bad-a$$ welder. I've also had to retrain how I was welding the bars, as this welder puts down a serious amount of steel in no time.
I should be able to deliver up there by next weekend, if nothing else pops up.
I moved my operation home, after I made the jigs, so I've been spending some time setting up lighting and wiring 220V for my new bad-a$$ welder. I've also had to retrain how I was welding the bars, as this welder puts down a serious amount of steel in no time.
I should be able to deliver up there by next weekend, if nothing else pops up.
#72
Inventor
Rennlist Member
Rennlist Member
Thread Starter
My 'factory' is back online, and bars are flying off my welding table.*
I'm driving at least as far as Tom M's house on Sat** afternoon to drop off the paid orders for Group 1.
Coincendentally, the poll ends Sat. After that I'm raising the prices $9 to cover costs***, and all bars will be shipped, unless you can arrange to pick up.
Next week I'll be working on packaging, and shipping options.
__________________
*If you consider a couple pairs a day, flying.
**03/11/2006
***Paid orders/deposits are not affected.
I'm driving at least as far as Tom M's house on Sat** afternoon to drop off the paid orders for Group 1.
Coincendentally, the poll ends Sat. After that I'm raising the prices $9 to cover costs***, and all bars will be shipped, unless you can arrange to pick up.
Next week I'll be working on packaging, and shipping options.
__________________
*If you consider a couple pairs a day, flying.
**03/11/2006
***Paid orders/deposits are not affected.
Last edited by PorKen; 03-08-2006 at 06:54 PM.
#74
For those of you inthe PacNW area, we are possibly planning on a late lunch/early dinner gathering in the Olympia/Tacoma...possibly up to Southcenter area......
No need to be a lift bar purchaser...just gather to hang out and talk 928 stuff.....I'll keep everyone posted as things develop...if it doesn't go..then Ken will just drop them at my place and I'll arrange with the respective owners to get their bars to them..
later,
Tom
89GT
No need to be a lift bar purchaser...just gather to hang out and talk 928 stuff.....I'll keep everyone posted as things develop...if it doesn't go..then Ken will just drop them at my place and I'll arrange with the respective owners to get their bars to them..
later,
Tom
89GT
#75
Rennlist Member
Join Date: Feb 2006
Location: Leonard, Texas
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Ken, I would like to have a set of each, but for now I'll just take a set for my 87 S4. Sending $$ via paypal. Let me know if there is additional shipping cost required. Zip Code 75452.
These are definitely going to make getting the car up and working under it easier!
These are definitely going to make getting the car up and working under it easier!