CHEAP - Front Performance Sway Bar "Seconds" Sale - ALL SOLD, THANKS!
11-18-2005, 10:15 AM
#46
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
LAST CALL! - Only 3 left!
__________________
David Roberts
2010 Jaguar XKR Coupe - 510HP Stock - Liquid Silver Metallic
928 Owners Club Co-Founder
Rennlist 928 Forum Main Sponsor
www.928gt.com
928 Specialists on Facebook - 928Specialists
Sharks in the Mountains on Facebook - 928SITM
David Roberts
2010 Jaguar XKR Coupe - 510HP Stock - Liquid Silver Metallic
928 Owners Club Co-Founder
Rennlist 928 Forum Main Sponsor
www.928gt.com
928 Specialists on Facebook - 928Specialists
Sharks in the Mountains on Facebook - 928SITM
12-01-2005, 04:51 PM
#49
Supercharged
Rennlist Member
Rennlist Member
Join Date: May 2002
Location: Back in Michigan - Full time!
Posts: 18,925
Likes: 0
Received 60 Likes
on
34 Posts
Got mine last week, got the bushing a couple days ago. Thanks again DR. Obviously $75 was the sweet spot if you could blow through all 50 in only a few days. 
09-19-2008, 11:55 PM
#50
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
yup..spending the evening searching for a few things and in the process digging up some stuff...
are these mounts still available?
i currently have the stock bar on front with the ott links and the "red greaseable" bushings (shown at bottom)and the bracket for these bushings looks like it has seen better days. The ones i circled below look stronger. They still available?
also...was there any progress on a "kit" to make the front mount stronger?
My plan is to eventually do this(aka Carl)...but was curious.
are these mounts still available?
i currently have the stock bar on front with the ott links and the "red greaseable" bushings (shown at bottom)and the bracket for these bushings looks like it has seen better days. The ones i circled below look stronger. They still available?
also...was there any progress on a "kit" to make the front mount stronger?
My plan is to eventually do this(aka Carl)...but was curious.
09-20-2008, 03:14 AM
#51
Rennlist Member
Hey Tony,
I just switched out the circled ones for the red ones you have now. I felt turn in was much better with the urethane bushing. I was really suprised it made a difference at all, but it did. I'd stick with them. If you really want the set up that came with the bar, I could send you mine. If the ones with the fittings are too weak over time, I'll probably just end up gussetting them.
I just switched out the circled ones for the red ones you have now. I felt turn in was much better with the urethane bushing. I was really suprised it made a difference at all, but it did. I'd stick with them. If you really want the set up that came with the bar, I could send you mine. If the ones with the fittings are too weak over time, I'll probably just end up gussetting them.
