CHEAP - Front Performance Sway Bar "Seconds" Sale - ALL SOLD, THANKS!
#33
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
37 " B" Front bars, cut and getting ready to ship. Hopefully we will get them all processed today, if not by tomorrow.
Thanks again everyone for helping me keep these out of the shredder!
Only 13 left!!!
Thanks again everyone for helping me keep these out of the shredder!
Only 13 left!!!
__________________
David Roberts
2010 Jaguar XKR Coupe - 510HP Stock - Liquid Silver Metallic
928 Owners Club Co-Founder
Rennlist 928 Forum Main Sponsor
www.928gt.com
928 Specialists on Facebook - 928Specialists
Sharks in the Mountains on Facebook - 928SITM
David Roberts
2010 Jaguar XKR Coupe - 510HP Stock - Liquid Silver Metallic
928 Owners Club Co-Founder
Rennlist 928 Forum Main Sponsor
www.928gt.com
928 Specialists on Facebook - 928Specialists
Sharks in the Mountains on Facebook - 928SITM
#36
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
From my original post
"Will be shipped without boxes so anticipate some scratches during shipment."
They all will be in the plastic sleeves (shown pulled back on some), but thats it.
"Will be shipped without boxes so anticipate some scratches during shipment."
They all will be in the plastic sleeves (shown pulled back on some), but thats it.
#38
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Rod,
>Just bought a bar - can you post the information on the hardware kits,
> or email the buyers, when you get it?
Complete Front Hardware Setup (as pictured below) including our new Xtreme Low Flex Front Sway Bar bushings (that are pre-configured to accept our forth coming Bolt On "NO weld" front mount reinforcing bracket), Locating Collars and Adjustable (pre-load) Rod End Drop Links. - $99
Same as above without Xtreme Bushing setup (links and collars only) - $79
Xtreme Low Flex Front Sway Bar Bushing Setup - $29
Complete Rear Hardware setup , includes Rod End Adjustable (pre-load) links, locating collars, and our safety bolts for installation - $79
ADDCO just informed me that we cleaned them out of all the hardware for these kits and they said approx. 2 weeks for delivery. I can probably get just our new Xtreme Bushing Kits sooner.
When they are all available (in stock) you can find them in the "New 928 Products" section or under "Performance" , "Suspension".
>Just bought a bar - can you post the information on the hardware kits,
> or email the buyers, when you get it?
Complete Front Hardware Setup (as pictured below) including our new Xtreme Low Flex Front Sway Bar bushings (that are pre-configured to accept our forth coming Bolt On "NO weld" front mount reinforcing bracket), Locating Collars and Adjustable (pre-load) Rod End Drop Links. - $99
Same as above without Xtreme Bushing setup (links and collars only) - $79
Xtreme Low Flex Front Sway Bar Bushing Setup - $29
Complete Rear Hardware setup , includes Rod End Adjustable (pre-load) links, locating collars, and our safety bolts for installation - $79
ADDCO just informed me that we cleaned them out of all the hardware for these kits and they said approx. 2 weeks for delivery. I can probably get just our new Xtreme Bushing Kits sooner.
When they are all available (in stock) you can find them in the "New 928 Products" section or under "Performance" , "Suspension".
#39
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Oh, sorry for the crappy photo, my good camera bit the dust and had to use the lousy backup :-(
Amazing what a "few" pixels will do!
Amazing what a "few" pixels will do!
#40
Like those bushing mounts. Just a little squish, but not much. You going to do that for the rear as well? I think thats a bigger issue however, as the rear would transmit more road roar since its on a different part of the body.
#41
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Hi Brendan,
>Like those bushing mounts.
Me too, they feel good :-) Those are what have been shipping with our production kits.
> Just a little squish, but not much.
Yep, we can do those for the guys with 32mm bars also, they use the same bracket and are even thinner, almost like they have a piece of electric tape wrapped around them...well "almost".
>You going to do that for the rear as well?
If there is a demand, it would actually be very easy to do. Think 2-piece aluminum sleeve with a thin poly bushing around it :-)
> I think thats a bigger issue however, as the rear would transmit more road roar since its on a >different part of the body.
True, but if enough people want them we can make them. I will of course test them on my car first, then I can give you honest feedback as to any noticeable noise transmissions before making a boat load of "noise makers" :-).
>Like those bushing mounts.
Me too, they feel good :-) Those are what have been shipping with our production kits.
> Just a little squish, but not much.
Yep, we can do those for the guys with 32mm bars also, they use the same bracket and are even thinner, almost like they have a piece of electric tape wrapped around them...well "almost".
>You going to do that for the rear as well?
If there is a demand, it would actually be very easy to do. Think 2-piece aluminum sleeve with a thin poly bushing around it :-)
> I think thats a bigger issue however, as the rear would transmit more road roar since its on a >different part of the body.
True, but if enough people want them we can make them. I will of course test them on my car first, then I can give you honest feedback as to any noticeable noise transmissions before making a boat load of "noise makers" :-).
#42
Rennlist Member
Thanks Dave, go ahead and put me on the "a-list" for former ott-link purchasers. No rush, i wont be driving her for a couple of months. Do you need a deposit or anything?
Thanks
Thanks
#43
So DR, do I not want the 28mm red front bushing from your web site to go with the $75 sway bar?? #928.SBB.9.5164.R Cause I just ordered one If not, please let me know what you recommend to replace when I put on the new bar?? Is that the "new Xtreme Low Flex Front Sway Bar bushings" that you refenced above? Is that a separate item I can switch for the one I already ordered? I know,..... I'm such a goof!
#44
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Hi Mel,
>So DR, do I not want the 28mm red front bushing from your web site to go with the $75 sway bar?? >#928.SBB.9.5164.R Cause I just ordered one
Yes, those will work great also, we have been selling those for 9 years with no complaints.
You will be happy with the ones you bought, plus you will not have to wait.
> Is that the "new Xtreme Low Flex Front Sway Bar bushings" that you refenced above?
No.
>Is that a separate item I can switch for the one I already ordered?
Not at this time, the problem is there is not enough quantity of the new Xtreme bushings to sell separately yet as they are all currently allocated to our Sway Bar Kits. It will be a few weeks before I can get any of those out.
> I know,..... I'm such a goof!
No your not, but I will be honest I am more confused than anyone at the moment,... and my head hurts :-)
>So DR, do I not want the 28mm red front bushing from your web site to go with the $75 sway bar?? >#928.SBB.9.5164.R Cause I just ordered one
Yes, those will work great also, we have been selling those for 9 years with no complaints.
You will be happy with the ones you bought, plus you will not have to wait.
> Is that the "new Xtreme Low Flex Front Sway Bar bushings" that you refenced above?
No.
>Is that a separate item I can switch for the one I already ordered?
Not at this time, the problem is there is not enough quantity of the new Xtreme bushings to sell separately yet as they are all currently allocated to our Sway Bar Kits. It will be a few weeks before I can get any of those out.
> I know,..... I'm such a goof!
No your not, but I will be honest I am more confused than anyone at the moment,... and my head hurts :-)