OB bumperette delete/rear diffusers
#1
Inventor
Rennlist Member
Rennlist Member
Thread Starter
OB bumperette delete/rear diffusers
Fairly unobtrusive, and may actually be functional.
I still have to rebracket the auto-trans cooler so it's in the center.
The black makes it difficult to see detail; the second shot is during test fitting.
I still have to rebracket the auto-trans cooler so it's in the center.
The black makes it difficult to see detail; the second shot is during test fitting.
#3
Inventor
Rennlist Member
Rennlist Member
Thread Starter
Jim,
"I find your lack of faith...disturbing."
...
I moved the cooler to the center. At least it stopped raining when I finished.
It's really tough to photograph against white!
"I find your lack of faith...disturbing."
...
I moved the cooler to the center. At least it stopped raining when I finished.
It's really tough to photograph against white!
#5
Addict
Rennlist Member
Rennlist Member
"Fairly unobtrusive, and may actually be functional"
Did you not look at what you did??? Entirely obtrusive and non functional.
Uhm...did you huff too much exhaust????????? No offense but , get serious. That's nothing short of what a ricer mod would look like for who in blazes knows what.
Just a friendly request....Yank those things off of there before you give us all a bad name!
Did you not look at what you did??? Entirely obtrusive and non functional.
Uhm...did you huff too much exhaust????????? No offense but , get serious. That's nothing short of what a ricer mod would look like for who in blazes knows what.
Just a friendly request....Yank those things off of there before you give us all a bad name!
#7
FYI - Earlier bumpers have smaller holes there to fill.
Trending Topics
#8
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
IMHO..Put the energy into molded plastic caps that can be placed over the stock bumperettes and painted to match with out any flexible paint stuff or whatever..
Whose POS is this?
Whose POS is this?
#9
Inventor
Rennlist Member
Rennlist Member
Thread Starter
Bah!
They actually look OK, and they are actually difficult to see what they are, in person, unless you look closely. It was difficult to find angles to photograph them in detail.
...
Tony,
That's a good idea actually. I want some paintable blanks for the US marker lights too.
...
Initially, all I wanted was to cover up the holes left by removing the clunky bumperettes. A painted panel across the indent would have been too easy, though.
They actually look OK, and they are actually difficult to see what they are, in person, unless you look closely. It was difficult to find angles to photograph them in detail.
...
Tony,
That's a good idea actually. I want some paintable blanks for the US marker lights too.
...
Initially, all I wanted was to cover up the holes left by removing the clunky bumperettes. A painted panel across the indent would have been too easy, though.
#10
Addict
Rennlist Member
Rennlist Member
Yo Vegas Baby...if I had my choice, those rear "Nipples" wouldn't even be on the car!
BTW Porken, don't let us stop you from innovating. It takes guys like you to come up with different ideas. They won't always go over well though.
BTW Porken, don't let us stop you from innovating. It takes guys like you to come up with different ideas. They won't always go over well though.
#11
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by 928ntslow
Yo Vegas Baby...if I had my choice, those rear "Nipples" wouldn't even be on the car!
I dont know if its legal in CA or not, doubt it, but could you get a "european" plate made in the same plate number that you have now?
That would cover the area.
Then again you may not like the big European plates?
I see them now and then in vegas on cars...not sure of the legality of them though.
Legal until pulled over i suppose ?
#14
Burning Brakes
Join Date: Oct 2003
Location: Durban, South Africa
Posts: 883
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PorKen
Bah!
They actually look OK, and they are actually difficult to see what they are, in person, unless you look closely. It was difficult to find angles to photograph them in detail.
...
Tony,
That's a good idea actually. I want some paintable blanks for the US marker lights too.
...
Initially, all I wanted was to cover up the holes left by removing the clunky bumperettes. A painted panel across the indent would have been too easy, though.
They actually look OK, and they are actually difficult to see what they are, in person, unless you look closely. It was difficult to find angles to photograph them in detail.
...
Tony,
That's a good idea actually. I want some paintable blanks for the US marker lights too.
...
Initially, all I wanted was to cover up the holes left by removing the clunky bumperettes. A painted panel across the indent would have been too easy, though.
#15
Drifting
Join Date: Jul 2002
Location: Los Angeles, CA
Posts: 3,348
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by heinrich
Ken, take a look at GT3 .... and the Ford GT ..... can you make that? VERY functional. I LOVE the idea of using those mountpoints.
Also, they might look better if painted body color...
Then they would not stand out as much.