Raceworks -

If I say, sent you a nice crappy pulley system for the early cars, and a moderatly large hunk of cylindrical aluminum - and a 36-1 Ford EDIS crank wheel with a viable inside diameter - could you... Maybe, --- Make me a pulley that can have the 36-1 wheel pressed on?

I would need it in about 30 days or so.

 

Sure, I would like a drawing to see exactly what you need but we can do it.

 

Pretty much a stock pulley from the early cars, but with the air pump pulley missing, and a flat area to press on the toothed wheel.
Can I call over the weekend?

 

In aluminum or any metal of your choice that will work.

 

Aluminum is always cheaper to machine than steel so your choice there. Give me a call at 803-233-4946 after 7:00pm Eastern today Ill be in the shop rebuilding a 951 engine all day so I will not be answering the phone until then (becouse I cannot hear it!)

 

niiiice

 

I worked for Chub part time in the Summer of 1973. He was a great mentor-helping me rebuild my 67 MGB.
Would like to know if he is still in Columbia, and doing well.

regds jim faulk
Niwot, colo.
jfaulkee@gmail.com