32 valve cam timing tool
#46
Thread Starter
Inventor
Rennlist Member
Rennlist Member
Measure twice...
Well, they're perfectly made, but have the wrong Z measurement.
Turns out I didn't double-check that the face offset in the CAD program included the material thickness. I gambled on not making the prototype, and came up snake eyes!
I'm having another set made with the proper dims. (I also changed the alignment features to take into account the width of the laser beam, and made a zero reference too.)
Turns out I didn't double-check that the face offset in the CAD program included the material thickness. I gambled on not making the prototype, and came up snake eyes!
I'm having another set made with the proper dims. (I also changed the alignment features to take into account the width of the laser beam, and made a zero reference too.)
#48
Thread Starter
Inventor
Rennlist Member
Rennlist Member
I can chop off the arm and use them for 'big washers', so I didn't toss them out.
I'd have to sell a truckload of conversions to use them up, though.
I rationalizing it as a 'learning experience'...
I'd have to sell a truckload of conversions to use them up, though.
I rationalizing it as a 'learning experience'...
#51
Thread Starter
Inventor
Rennlist Member
Rennlist Member
No, to the former...
The arm is just a bit too close to the ring (-1.85MM), so it doesn't fit 'round the gear properly. (It's designed to fit tightly.)
I might have been able to bend it into submission, but then it would be more difficult to check the alignment, 'in the field'.
The arm is just a bit too close to the ring (-1.85MM), so it doesn't fit 'round the gear properly. (It's designed to fit tightly.)
I might have been able to bend it into submission, but then it would be more difficult to check the alignment, 'in the field'.
#53
Thread Starter
Inventor
Rennlist Member
Rennlist Member
For a while we had some neighbors that ran on angel dust.
#56
Thread Starter
Inventor
Rennlist Member
Rennlist Member
Sorry Adam, I didn't make any extras on the 'fixit' batch.
I'll have to make a poll or something to get another run going.
I'll have to make a poll or something to get another run going.
#58
Thread Starter
Inventor
Rennlist Member
Rennlist Member
The new, improved! batch will be ready tommorrow afternoon, so I will hopefully ship on Monday.
I might get some pics for a manual this weekend too!
I might get some pics for a manual this weekend too!
#60
Thread Starter
Inventor
Rennlist Member
Rennlist Member
Done (again)
I'll hopefully will be able to take some install pics this weekend.
Regardless, I will be packaging them up, and will ship on Monday.
I'll hopefully will be able to take some install pics this weekend.
Regardless, I will be packaging them up, and will ship on Monday.