Scott M.

Need a source of silicone hose for some 928 projects. My Google search didn't really turn up much.

Looking for 2" and 3+".


Scott

Tony

http://www.turbohoses.com/Couplers.htm

Scott M.

Thanks Tony;

Imagine all the hits I got on Google when I actually spelled Silicone correctly.

I think I found a good source...

Scott

Garth S

Does this mean that the car will be getting a bra for Xmas?

Blown Beast

If you need 3 3/4in silicone hose let me know I had to have a 4ft stick custom made for me. I used about 3in's of it. It is red though. This is the M/A size I believe.

Sean79 5spd

Hose Techniques

BC

Blown - Are you saying thats the same size as say, the end of the TB on the S4?

Blown Beast

I am not sure on the TB....you would have to measure it. But it is a fit for the Mass-Air.

BC

When you gonna dyno that 88 Blown?

Got any closeups of that intake? Or is that "Proprietary"?

Rez

I'm with Sean on Hose Techniques. I ordered some 3.2mm, 5mm, 7mm and 3/4" for the 12mm stuff. You have to watch because some places rope you with a minimum length order, which could get expensive if you want different sizes.

Sean79 5spd

I was able to come to arrangement with Hose techniques on min order quantities. They were fairly reasonable once I explained what I was doing.

Blown Beast

Brendan, Just as soon as I trace down an electrical glitch/cut-out. No "Proprietary" stuff any were on my car.......If you had shown up to Sharktoberfest you could have taken lots of pic's. :-)

BC

Sure Dude. Rub it in.

Scott M.

Yeah man! It's not like you live in Pennsylvania or some god awful place, had to fly in on thurdsy, fly out Sunday, land at 6am Monday morning, drive 2.5 hrs and be at work at 9am. Gee!


Scott

figgen

Hose techniques supplied me with all I needed to complete my vaccum line replacement. Good vendors with prompt communication and supply.