"928 Stuff Wanted" - Read before posting
02-02-2005, 07:23 PM
#61
Drifting
Looking for a good MAF, either brand new or almost new for my 1986 32v.
Also:
S4 brake adapters
S4 rear bumper
short shifter
Old spindles for my S4 brakes
S4 front brake hoses
Limited Slip diff.
Also:
S4 brake adapters
S4 rear bumper
short shifter
Old spindles for my S4 brakes
S4 front brake hoses
Limited Slip diff.
Last edited by Benton; 02-09-2005 at 03:45 PM.
02-09-2005, 02:41 PM
#63
Red - I have the BOTTOM of an S4 air box. Is that you you needed?
NEED: I need to buy a POD and possibly look into a later year (after 78) gauge cluster that works. SOLVED. THANKS RIX
NEED: The Blower Fan for the 928. Mine was seized. GOTTEN - THANKS TOM
Please PM me. This thread is hard to get track of sometimes.
NEED: I need to buy a POD and possibly look into a later year (after 78) gauge cluster that works. SOLVED. THANKS RIX
NEED: The Blower Fan for the 928. Mine was seized. GOTTEN - THANKS TOM
Please PM me. This thread is hard to get track of sometimes.
Last edited by BC; 02-16-2005 at 10:03 PM.
02-10-2005, 09:50 AM
#64
Instructor
Join Date: Jul 2001
Location: Philly, PA - previously Hudson Valley, NY
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Hello......I need a pair of VALVE COVERS for a 1987 S4 Auto. Actually I really need the DRIVER's SIDE because it's cracked, but I will also consider purchasing the pass. side as well, if the price is right!
I have seen them go for less than $70 used but I'm looking for a better price (if possible). I have a pair of 1985-1986 valve covers that I will consider trading/selling.
The valve cover(s) I need MUST BE straight and no cracks or chiped. Paint flacking is fine. I will probably refinish them anyway. USP Ground shipping to NY zip 12603.
Email me with your price: goyal99@yahoo.com
Bill K.
I have seen them go for less than $70 used but I'm looking for a better price (if possible). I have a pair of 1985-1986 valve covers that I will consider trading/selling.
The valve cover(s) I need MUST BE straight and no cracks or chiped. Paint flacking is fine. I will probably refinish them anyway. USP Ground shipping to NY zip 12603.
Email me with your price: goyal99@yahoo.com
Bill K.
02-16-2005, 11:59 PM
#66
NEED: 928 1983 5spd trans.
Has to be 28/08
If not, then I need 5th gear, specifically the engagement ring on the 5th gear.
Its a different size than other years.
Has to be 28/08
If not, then I need 5th gear, specifically the engagement ring on the 5th gear.
Its a different size than other years.
02-22-2005, 01:50 PM
#68
87 Pistons, Tolerance 2. Need a whole set.
03-04-2005, 12:44 PM
#72
Supercharged
Rennlist Member
Rennlist Member
Join Date: May 2002
Location: Back in Michigan - Full time!
Posts: 18,925
Likes: 0
Received 60 Likes
on
34 Posts
EDIT: Got it. Thanks Red.
Oh yeah.... and a clutch pedal micro switch for the cruise control. Need one of those too, please!!!!?????
Oh yeah.... and a clutch pedal micro switch for the cruise control. Need one of those too, please!!!!?????
Last edited by AO; 03-21-2005 at 09:21 AM. Reason: Got It.
03-07-2005, 05:05 PM
#75
Addict
Rennlist Member
Rennlist Member
Does anyone have a 79 (double disk clutch) short shaft in good condition. My terminology may not be correct, this is the shaft that carries the clutch disks and is connected to the shaft in the torque tube.
The splines on mine are worn so the disks don't slide properly.
Thanks
Sean
The splines on mine are worn so the disks don't slide properly.
Thanks
Sean