Jim Page

Hacker-Pschorr threw together a picture site of my 1987 928S4 track car.

The details are in the pictures:

http://members.rennlist.com/pageauto/


EDIT -
I did join Rennlist, anybody know why it's not listing "rennlist member" by my user name?

Red UFO

Welcome dude,

The member status takes anywhere from 24 hours to 1 week. Right now the owner John D. is on vaction so it might take a few.

Now to the splain'

Please explain what the red light does? In this pic.
http://members.rennlist.com/pageauto/Interior1.JPG

What are all the gauges and switches for?
That is one nice looking track car engine!

Jim Page

If you look under "Miscellaneous engine pics" - 2nd column 3rd picture down, you can see the sending unit for this light on the Accusump (where the heater blower is normally located). This lights up when the oil pressure drops below a specified pressure.

ErnestSw

Have you dynoed it?

Jim Page

The go cart?

ErnestSw

The track car.

Jim Page

j/k - nothing has been on the dyno, shooting for spring.

Tony

Lots of eye candy on that link! thanks for sharing.
I cant wait to see this one come together!

BC

I was planning on using the area you are using for the fornt intercooler exchangers for brake ducting to keep the big reds cool. Have you planned another strategy for that?

I see TWO or THREE pumps for the intercooler? Care to comment?

BC

Also, if I may ask, - where did you get the Y block on the passenger side for the two -10 going into the front of the rails?

I can't see if you bring them back together before reentry into the tank?

Thanks

SharkSkin

Nice BWAAAHHH adjuster....

drnick

very nice, looks like a great drive!

Jim R.

Very nice! That car should absolutely fly.

Jim R.

blau928

Hi Jim,

I have a set of AP CP5555 Calipers that I need to make brackets for. Instead of reinventing the wheel, how much would you charge me to make a set for my calipers. They have been sitting in my barn for quite some time in the box.... In addition, what about the rotor hats, are you using Brembo rotors, or AP? Either way, can you tell me how much to make a pair of hats.

I can have it done locally, but I would rather use the time in other areas ..

Thanks,

BC

Okay, I get it now with the intercooler.... Wait... Whats with the fenderwell coolers then. Are those oil?