oil breather exhaust vent system
#31
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Well,
from my head, to the card mock up..to a chunk of metal!
Im pretty damn proud of myself actually! This is what enjoy about this SC thing. It should work OK i guess.
I added a copper scrubber to the top, then sealed it in using aluminum wire mesh sandwiched between the two halfs of the assembly. With 4 tack welds on each corner, nothing is going anywhere. I ground down all my welds and it actually looks pretty good!
BTW..if there is anythign wrong with it. I dont want to know.
Im done messing with it!
from my head, to the card mock up..to a chunk of metal!
Im pretty damn proud of myself actually! This is what enjoy about this SC thing. It should work OK i guess.
I added a copper scrubber to the top, then sealed it in using aluminum wire mesh sandwiched between the two halfs of the assembly. With 4 tack welds on each corner, nothing is going anywhere. I ground down all my welds and it actually looks pretty good!
BTW..if there is anythign wrong with it. I dont want to know.
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![banghead](https://rennlist.com/forums/graemlins/banghead.gif)
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
#38
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by heinrich
Tony where did you find Sasquatch and how did you teach him to hold that part?
...
Kidding Man ![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![Cool](https://rennlist.com/forums/images/smilies/cool.gif)
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
#39
Range Master
Pepsie Lite
Lifetime Rennlist
Member
Pepsie Lite
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Tony
Gee, thanks Heinrich. But ya know, Id rather have the hair on my arms than on my back
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![Cool](https://rennlist.com/forums/images/smilies/cool.gif)
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
#42
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Tony
Well, this is what im going to use. Its used in aircraft. However, i wont be paying the 300-400 bucks Ive seen advertised for the stupid thing. Ive seen the crossection of one after it was ran through a band saw.
I will build it my self...yet another "fab" project!
Thank the words FAA and STC for the price..insane for what it really is!.
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
![evilgrin](https://rennlist.com/forums/graemlins/evilgrin.gif)
Thank the words FAA and STC for the price..insane for what it really is!.
![](http://www.m-20turbos.com/images/400-A.jpg)
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
I love when a plan comes together.
Its done and has just been test fitted. All fits neatly next to and slighlty below the brake resivour/booster area. POIFECT!!Now i get to grind the welds down and add a dose of black wrinkle paint. Took all but 15minutes tops to get welded up. I stood there and held the parts as they were tacked.
And it DIDNT cost me 300-400 bucks either!
![evilgrin](https://rennlist.com/forums/graemlins/evilgrin.gif)
#44
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have used one system for years, and recently, tried another "route", and pumped out about 1 full qt of oil...some onto the headers.............not a pretty sight...
Using the valve covers as part of the breather system is not the best way to go. I have also used the oil filler neck with not much better results. Each will produce about 1 pint for each half hour racing. I am working on a system to reduce it to zero without dumping it into the exhaust...although the easy way is becoming attractive!
A DeVore/DEVEK dry sump, as used on other dry sumped 928 racers, is set for the next engine revision.
Marc
DEVEK
Using the valve covers as part of the breather system is not the best way to go. I have also used the oil filler neck with not much better results. Each will produce about 1 pint for each half hour racing. I am working on a system to reduce it to zero without dumping it into the exhaust...although the easy way is becoming attractive!
A DeVore/DEVEK dry sump, as used on other dry sumped 928 racers, is set for the next engine revision.
Marc
DEVEK
#45
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by marc@DEVEK
I have used one system for years, and recently, tried another "route", and pumped out about 1 full qt of oil...some onto the headers.............not a pretty sight...
Using the valve covers as part of the breather system is not the best way to go. I have also used the oil filler neck with not much better results. Each will produce about 1 pint for each half hour racing. I am working on a system to reduce it to zero without dumping it into the exhaust...although the easy way is becoming attractive!
A DeVore/DEVEK dry sump, as used on other dry sumped 928 racers, is set for the next engine revision.
Marc
DEVEK
Using the valve covers as part of the breather system is not the best way to go. I have also used the oil filler neck with not much better results. Each will produce about 1 pint for each half hour racing. I am working on a system to reduce it to zero without dumping it into the exhaust...although the easy way is becoming attractive!
A DeVore/DEVEK dry sump, as used on other dry sumped 928 racers, is set for the next engine revision.
Marc
DEVEK
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)