Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

CLUNK Clunk clunk noise.. help

Thread Tools
 
Search this Thread
 
Old 06-14-2023 | 08:52 AM
  #61  
928 GT R's Avatar
928 GT R
Rennlist Member
 
Joined: Sep 2006
Posts: 6,280
Likes: 5,778
From: Back 0 Beyond
Default

Originally Posted by Todd Gibbs
Yes, all nuts and bolts are tight. The noise is definitely from the rear.

If its not a 'known sound' I'll just keep hunting - I was hoping everyone would say "oh, thats your blah blah"
Todd,

As a diagnostic, I suggest that you have someone else drive the car while you get in the back of the car to listen for and better locate the source of sound.

As always, check the last thing you worked on before the sound started.

Enjoy!
Old 06-14-2023 | 09:28 AM
  #62  
C531XHO's Avatar
C531XHO
Burning Brakes
 
Joined: Jul 2015
Posts: 843
Likes: 108
From: Dorset
Default

This is my favourite story about a funny noise in the boot...

https://www.abctales.com/story/ian/spikes-boot
The following users liked this post:
9two8 (06-14-2023)
Old 06-14-2023 | 09:29 AM
  #63  
Petza914's Avatar
Petza914
RL Community Team
Rennlist Member
 
Joined: Oct 2007
Posts: 26,502
Likes: 6,912
From: Clemson, SC
Default

Originally Posted by GerritD

By the way I have a like wise clunk at the front, only when I turn and with a small bump in the road at the same time.
Further investigation lead to play on my steering rack. No leaks though.
I have the exact.same thing. Need to investigate if it's the rack itself or the steering linkage.
Old 06-14-2023 | 09:34 AM
  #64  
Darklands's Avatar
Darklands
Rennlist Member
 
Joined: Jul 2008
Posts: 2,780
Likes: 1,225
From: Near Hamburg-Germany
Default

Originally Posted by Todd Gibbs
I did think about that - but Im not sure I can attach it securely enough to see whats happening. My best hope is to repeat it in my garage (bumping it up&down or wobbling components). Nice idea tho!
The 928 is the wrong car for having sex in at our age!

Last edited by Darklands; 06-14-2023 at 09:37 AM.
The following users liked this post:
WestInc (06-14-2023)
Old 06-14-2023 | 10:27 AM
  #65  
928 GT R's Avatar
928 GT R
Rennlist Member
 
Joined: Sep 2006
Posts: 6,280
Likes: 5,778
From: Back 0 Beyond
Default

Originally Posted by Darklands
The 928 is the wrong car for having sex in at our age!
That depends on your choice of partners... Just sayin!
Some are more athletic and enthusiastic than others
The following users liked this post:
Darklands (06-14-2023)
Old 06-14-2023 | 10:32 AM
  #66  
Darklands's Avatar
Darklands
Rennlist Member
 
Joined: Jul 2008
Posts: 2,780
Likes: 1,225
From: Near Hamburg-Germany
Default

Looking around is ok, the meal is served at home!
Old 06-14-2023 | 04:40 PM
  #67  
Todd Gibbs's Avatar
Todd Gibbs
Thread Starter
Instructor
 
Joined: Aug 2020
Posts: 157
Likes: 108
From: Oxford, England
Default

Originally Posted by Darklands
The 928 is the wrong car for having sex in at our age!
Not sure this helps track down the clunk, but it made me laugh... which helps a lot
The following users liked this post:
Darklands (06-14-2023)
Old 06-14-2023 | 04:41 PM
  #68  
Todd Gibbs's Avatar
Todd Gibbs
Thread Starter
Instructor
 
Joined: Aug 2020
Posts: 157
Likes: 108
From: Oxford, England
Default

Originally Posted by 928 GT R
Todd,

As a diagnostic, I suggest that you have someone else drive the car while you get in the back of the car to listen for and better locate the source of sound.

As always, check the last thing you worked on before the sound started.

Enjoy!
Yeah will do - Ideally I want to be able to repeat it at home, up on axel stands or ramp. I managed to do this the other day and tracked down the missing spring clip on the driver-side rear calliper.
Old 06-14-2023 | 05:46 PM
  #69  
GregBBRD's Avatar
GregBBRD
Former Vendor
 
Joined: Feb 2005
Posts: 15,230
Likes: 2,489
From: Anaheim
Default

Design issue with C/V joints, in the early 928's
Remove the axle and see if the axle shaft has been hitting the stub axle, when load is applied.
(It will leave marks.)


Last edited by GregBBRD; 06-14-2023 at 05:52 PM.
The following users liked this post:
MCR 85 928 (06-15-2023)
Old 06-14-2023 | 06:52 PM
  #70  
Todd Gibbs's Avatar
Todd Gibbs
Thread Starter
Instructor
 
Joined: Aug 2020
Posts: 157
Likes: 108
From: Oxford, England
Default

Originally Posted by GregBBRD
Design issue with C/V joints, in the early 928's
Remove the axle and see if the axle shaft has been hitting the stub axle, when load is applied.
(It will leave marks.)
Thanks Greg, I'll have them out soon to inspect and re-grease. Will check for marks at the same time

Todd.
Old 06-15-2023 | 01:39 AM
  #71  
Darklands's Avatar
Darklands
Rennlist Member
 
Joined: Jul 2008
Posts: 2,780
Likes: 1,225
From: Near Hamburg-Germany
Default

You can also change them from left to right to avoid the wear on the bearings.
Old 06-15-2023 | 12:59 PM
  #72  
gazfish's Avatar
gazfish
Rennlist Member
 
Joined: Feb 2016
Posts: 1,056
Likes: 203
From: Dublin, Ireland
Default

Did you fill the tank with fuel before the noise started Todd? Long shot but maybe the weight change shifting the CV angle or something in the tank is associated with it?

Last edited by gazfish; 06-15-2023 at 01:46 PM.
Old 06-17-2023 | 06:02 AM
  #73  
Todd Gibbs's Avatar
Todd Gibbs
Thread Starter
Instructor
 
Joined: Aug 2020
Posts: 157
Likes: 108
From: Oxford, England
Default

Originally Posted by gazfish
Did you fill the tank with fuel before the noise started Todd? Long shot but maybe the weight change shifting the CV angle or something in the tank is associated with it?
Thats a very very good guess - I have filled it up more than previously.

UPDATE::for the moment I am stopping the search. After tracking down the missing spring clip in the rear calliper I am happy that this clunk is not dangerous. This clunk is something like a bracket/etc jiggling back and forth over big bumps. I will track it down over time and probably when I rebuild the rear suspension.

Thanks everyone for your input - I will post back once I do locate it to close out this thread.
Old 07-08-2023 | 06:12 PM
  #74  
Todd Gibbs's Avatar
Todd Gibbs
Thread Starter
Instructor
 
Joined: Aug 2020
Posts: 157
Likes: 108
From: Oxford, England
Default

So I am still trying to track this noise down. I have recorded a better video (and it seems to be getting louder)...


From this, can anyone guess what it could be? It doesnt do it if I lightly press the brakes (or hard of course ). I have visually inspected everything I can get access to around the rear (the noise is definitely coming from the driver-side rear (UK car)). I havent taken anything apart as I will need to replace bushes etc and that is a big job that needs planning out. I have checked every bushing/mounting/bolt I can see and extensively wobbled the exhaust.

Any help appreciated!

Todd.
Old 07-08-2023 | 06:31 PM
  #75  
Todd Gibbs's Avatar
Todd Gibbs
Thread Starter
Instructor
 
Joined: Aug 2020
Posts: 157
Likes: 108
From: Oxford, England
Default

looking for any pointers as to what on earth could make this noise, accepting its nothing obvious that I can touch/see/feel/wobble.


Quick Reply: CLUNK Clunk clunk noise.. help



All times are GMT -3. The time now is 06:25 PM.