February 2020 Panorama - Vanster!
02-20-2020 | 10:03 PM
#46
Three Wheelin'
Joined: Oct 2006
Posts: 1,499
Likes: 111
From: Oakland, MI
Yes.
Until a month ago, when I finally made a butter smooth clutch that would "hold" the torque from a 6.5 liter engine, I was to the point where I was only building 6.5 liter engines for the automatics.
Andy's 605HP, 500 ft lbs of toque from 5,000 to 7,000 rpms was married to an automatic, which I "beefed up" to absorb all that torque.
The automatic cars I've built are....wonderful.
Until a month ago, when I finally made a butter smooth clutch that would "hold" the torque from a 6.5 liter engine, I was to the point where I was only building 6.5 liter engines for the automatics.
Andy's 605HP, 500 ft lbs of toque from 5,000 to 7,000 rpms was married to an automatic, which I "beefed up" to absorb all that torque.
The automatic cars I've built are....wonderful.
02-21-2020 | 01:03 PM
#49
Former Vendor
Joined: Feb 2005
Posts: 15,230
Likes: 2,478
From: Anaheim
02-21-2020 | 02:14 PM
#50
Rennlist Member
Joined: Sep 2010
Posts: 13,582
Likes: 1,034
From: Boulder Creek, CA
02-22-2020 | 04:49 AM
#51
Rennlist Member
Joined: May 2012
Posts: 4,976
Likes: 319
From: Thousand Oaks California
Hmm, now that I know what a rebuild starts at it might be best to hand over the reigns of my build at this point.
Wouldn't hurt to know Greg looked everything over to make sure it's as perfect as possible.
Wouldn't hurt to know Greg looked everything over to make sure it's as perfect as possible.
