Dual Disc Clutch Balance Connundrum?
#16
RL Community Team
Rennlist Member
Rennlist Member
Hey Pete, I was gonna text you and see if you had or could take a pic of the pins from the intermediate plate to the flywheel , since you're the only one in our Carolinas group that also has a DD clutch. My clutch discs aren't Spec, they are Sachs, but it was good to know that the Spec was grabby. Makes me feel better about going with OEM. Lol. Thanks.
#17
Drifting
Thread Starter
Sorry Stan I've been at the hospital all day with my wife having gall bladder surgery. I'll try and post some pics tomorrow. I gave Roger the part numbers from my current PP and intermediate plate and he thinks I need the 2 smaller pins and one large one according to the PET. Thanks.
#18
Drifting
Thread Starter
OK, finally have time to post a couple pics of what I have. After crossing the Sachs part numbers, it appears that I have a 928 116 031 XX Pressure Plate, and a 928 116 033 XX Intermediate Plate. I have no alignment pins, nor were there any upon removal of the assembly 4 years ago. I have ordered 3 of the smaller pins from Roger, as the larger pin shown in PET is NLA. Here are pics of PP and IMP.