928 Rack rebuild
#1
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Well Guys and gals,
I have the rack outta the car and am just going through the proccess of tearing it apart, I dont have the ends off, yet to make the tool, but I have the rest of it apart and everything else shows very little wear and the seals look fine, although i know where it was leaking and I havent hit that part yet,
i have taken a few photos, and I will be posting them on my site and telling people who have tech pages to upload them and use them at free will,
I do have a question though, I was refered to TransTech for a rebuild kit, I have sent them 2 e-mails and there has been no reply, I have waited over a week, should I call? or are they just really busy? also to anyone who has bought the kit what was the price?
I have the rack outta the car and am just going through the proccess of tearing it apart, I dont have the ends off, yet to make the tool, but I have the rest of it apart and everything else shows very little wear and the seals look fine, although i know where it was leaking and I havent hit that part yet,
i have taken a few photos, and I will be posting them on my site and telling people who have tech pages to upload them and use them at free will,
I do have a question though, I was refered to TransTech for a rebuild kit, I have sent them 2 e-mails and there has been no reply, I have waited over a week, should I call? or are they just really busy? also to anyone who has bought the kit what was the price?
#2
Three Wheelin'
Join Date: Nov 2003
Location: O.C. California
Posts: 1,545
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Lizard, I part a rebuild kit from Partwerks. They have them on ebay. I got mine for like 70 bucks I think. Al it is is a bunch of rubber gaskets and some plastic parts. check it out. They have a pic of the kit.
http://cgi.aol.ebay.com/ebaymotors/w...tem=2458577310
http://cgi.aol.ebay.com/ebaymotors/w...tem=2458577310
#3
#5
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
T Colvin, I have the rack still half apart and it is seeming to be very easy to do just you have to make up the special tool which I havent done yet,
Brendan, did you have to call them to get the kit, I have e-mailed them 2x and neither time have I heard any responce, if I dont hear from them tomorrow I may call but cross border calling is expensive and I would rather put that money towards parts,
Brendan, did you have to call them to get the kit, I have e-mailed them 2x and neither time have I heard any responce, if I dont hear from them tomorrow I may call but cross border calling is expensive and I would rather put that money towards parts,
#6
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have always called them lizard. Big companies rarely respond to email, in my experience. Get yourself one of those international calling cards for calling these guys, 928intl, devek, 928 spec, etc.
Trending Topics
#9
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
T Colvin, I have already spoken for it and will be getting it off sterling, as per the tool, it is exactly like a coil over height adjustment tool with the center diameter being 2" and the little "tongue" being just a hair under 1/4"
#11
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
hey actually Sterling I have sent you another PM, and TColvin you can get the rack rebuild kit from him, I just got a call from a guy here in the lower mainland who has the kits in stock and will sell me one for $59.95CDN so i am just going to do that and not worry about the shipping end of it, sorry for any inconvience I might have caused
#12
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
oh and T Colvin as per the pics, i am going to be taking pics during the reinstall process and the replacement of the seals, I can if you wish also take movies with sound and put them on a cd and mail it to you for cost of shipping but it is probably going to be another week or 2 to get it done.
#13
Done With Sidepatch
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally posted by Lizard931
hey actually Sterling I have sent you another PM, and TColvin you can get the rack rebuild kit from him, I just got a call from a guy here in the lower mainland who has the kits in stock and will sell me one for $59.95CDN so i am just going to do that and not worry about the shipping end of it, sorry for any inconvience I might have caused
hey actually Sterling I have sent you another PM, and TColvin you can get the rack rebuild kit from him, I just got a call from a guy here in the lower mainland who has the kits in stock and will sell me one for $59.95CDN so i am just going to do that and not worry about the shipping end of it, sorry for any inconvience I might have caused
#14
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yah company name is JMC they are in the Delta area, sorry the # is left at home I am at work, I suggest getting ahold of transtec, they called me on the 3rd try of an e-mail and they said the kit was $30 through them but they had suppliers above the border and gave me there name and # they might be able to find one closer to you
oh and for the part #'s the 8320 is the kit you want the C8320 is the euro version
oh and for the part #'s the 8320 is the kit you want the C8320 is the euro version