Exhaust Tip
#1
Inventor
Rennlist Member
Rennlist Member
Thread Starter
Exhaust Tip
Well, my new auto-darkening welding helmet from Harbor Freight (on sale for $50!), works great! Maybe a little too well...
I'm torn between gagging, and actually liking it. It's kinda of got that anime' Sci-Fi look.
I couldn't find the dual tip I wanted, on a Saturday, so I took three single resonators and got over-creative.
The lower right pic shows what my original plan was. Tips pointing up to aid aerodynamics (hot air jet into the turbulence zone).
Side note: you can see the extra wide stance with my (new to me) S4 wheels and 25MM spacers.
~thread~start~
I'm torn between gagging, and actually liking it. It's kinda of got that anime' Sci-Fi look.
I couldn't find the dual tip I wanted, on a Saturday, so I took three single resonators and got over-creative.
The lower right pic shows what my original plan was. Tips pointing up to aid aerodynamics (hot air jet into the turbulence zone).
Side note: you can see the extra wide stance with my (new to me) S4 wheels and 25MM spacers.
~thread~start~
Last edited by PorKen; 02-08-2004 at 04:23 PM.
#2
Rennlist Member
" Tips pointing up to aid aerodynamics (hot air jet into the turbulence zone)"
--Now if you added F-18 thrust reversing deflectors, the big GTS brakes wouldn't be necessary!
I'm envious - don't know how to weld! But, as you do weld, consider adding a fourth tip to give a 'quad' with two per side (like the after market 993/996 units). It might look OK as you've already switched the first pair to a straight back location (from stock)???
--Now if you added F-18 thrust reversing deflectors, the big GTS brakes wouldn't be necessary!
I'm envious - don't know how to weld! But, as you do weld, consider adding a fourth tip to give a 'quad' with two per side (like the after market 993/996 units). It might look OK as you've already switched the first pair to a straight back location (from stock)???
#3
Rennlist Member
PorKen,
You never cease to amaze me. I think the dual tip is cool, but the triple tip looks like a Gembella space machine. Power to ya all the way.
You have quite the ability to weld. How difficult would it be to turn a 3" inlet monza tip into a 3 1/2". The trick would be in welding it so that the 3 1/2" cross-sectional surface area remains no less than 3 1/2" (9.6 sq in, oval-like), as it transitions into the dual tip.
You never cease to amaze me. I think the dual tip is cool, but the triple tip looks like a Gembella space machine. Power to ya all the way.
You have quite the ability to weld. How difficult would it be to turn a 3" inlet monza tip into a 3 1/2". The trick would be in welding it so that the 3 1/2" cross-sectional surface area remains no less than 3 1/2" (9.6 sq in, oval-like), as it transitions into the dual tip.
#5
Inventor
Rennlist Member
Rennlist Member
Thread Starter
Quad tips would look cool, and not too difficult:
I'll have to make a heat-shield where it passes under the gas tank.
On welding: I have a Lincoln 110V Mig welder, with flux core wire, combined with the auto-darkening helmet, it is really easy to weld (non-structural items). Pretty much like a hot-glue gun.
I think I'll put the Fifth Element tip on my truck, instead...
I'll have to make a heat-shield where it passes under the gas tank.
On welding: I have a Lincoln 110V Mig welder, with flux core wire, combined with the auto-darkening helmet, it is really easy to weld (non-structural items). Pretty much like a hot-glue gun.
I think I'll put the Fifth Element tip on my truck, instead...
#6
Inventor
Rennlist Member
Rennlist Member
Thread Starter
Jadz928,
When I redid my 3" system, I chopped my Monza inlet off, and welded on a larger and angled inlet made from a piece of 3" pipe, cut with two ~15 degree angles to make a point. Then I pounded the points around the intersection of the resonators and welded it back together:
3" DIY Exhaust
When I redid my 3" system, I chopped my Monza inlet off, and welded on a larger and angled inlet made from a piece of 3" pipe, cut with two ~15 degree angles to make a point. Then I pounded the points around the intersection of the resonators and welded it back together:
3" DIY Exhaust
Trending Topics
#10
Race Director
Man, once you sell that car some poor mechanic is going to course for a month about you as the most stupid PO of the world..
(because he don't understand the ingenuity of course..)
(because he don't understand the ingenuity of course..)
Last edited by sweanders; 01-26-2004 at 05:16 AM.
#12
Inventor
Rennlist Member
Rennlist Member
Thread Starter
Jag är inte så smart, snarare ointelligent eller dum, men minst är jag inte Skånske!
Here's a detail shot:
I'm starting to like the 'Trident', more and more...
The quad tip is actually a little more of a challenge than I thought. The gas tank hangs down lower than the battery box so I can't go directly under it. If I go along under the bumper then the slush-box radiator won't get any cool air. Maybe, if I move the radiator over where the cutout for the stock tips is...
Here's a detail shot:
I'm starting to like the 'Trident', more and more...
The quad tip is actually a little more of a challenge than I thought. The gas tank hangs down lower than the battery box so I can't go directly under it. If I go along under the bumper then the slush-box radiator won't get any cool air. Maybe, if I move the radiator over where the cutout for the stock tips is...
#13
Race Director
Originally posted by PorKen
Jag är inte så smart, snarare ointelligent eller dum, men minst är jag inte Skånske!
Jag är inte så smart, snarare ointelligent eller dum, men minst är jag inte Skånske!
All the smart people in Sweden come from Skåne, but our dialect is a bit different compared to the puffs in Stockholm area..
That exhaust tip looks wild, I've never seen anything like it.