928 Tow Eye Thread Clean-out Tap
#106
Rennlist Member
Thread Starter
#107
Rennlist Member
Thread Starter
Congratulation, Perci, on being a Member. I posted the kit to you about noon today by priority mail. You should have it in a few days. I forgot to include my instructions, but I sent you a PM suggesting that you send your email address to my office email and my secretary will send them to you by email.
Good luck. Jerry Feather
Good luck. Jerry Feather
#108
Rennlist Member
Thread Starter
I sent a kit to Bob in Indiana last Friday and he received it yesterday, Monday. He has some time off so he was able to get the plug removed with the kit and by following my instructions. That was quick. I hope that if he sees this he might post something about how he got his plug removed.
I also heard from the kit that has been out for so long; and apparently it is now going to come home.
Anyone else?
I also heard from the kit that has been out for so long; and apparently it is now going to come home.
Anyone else?
#109
Rennlist Member
Thread Starter
I have to say that Bob in Indiana has renewed my faith in all of you who might be needing to borrow one of the Tap Kits. He has received the kit, removed his eye plug and has shipped the kit back for return about this Saturday. That is only 8 days. Enough said. I'm still interested in loaning a tap kit to any of the rest of your Rennlist Members.
#110
Rennlist Member
Thread Starter
Thanks, Rob. The kit returned as stated. I appreciate the gratuity; much more than necessary. I'll clean up the shank of the large bit in my lathe. No big deal. It is kind of a small shank for such a large bit, but I didn't expect too many guys to have a half inch chuck in their drill motor. You are a very classy guy.
Last edited by Jerry Feather; 08-14-2021 at 06:02 PM.