Story of my life, need to make room in garage.

Stuff you can have for shipping/handling:
- Good Bosch ignition coils, I think I have 3
- NA throttle bodies, and/or NA TPS units. I have several.
- FPRs and fuel dampers. Let me know early or late 944, they're all used but none are blown to the best of my knowledge.
- Red USDM bumpers from my '83 NA. Not perfect but certainly decent. They're getting junked soon so hopefully someone local can grab them, hate to throw away parts that are usable.
- 1 set of rear bumper pads. 2/3 studs present on driver side (middle missing) and pass/ side has no studs.
- Early NA headers. Painted with high heat exhaust paint (black) and surface rust stripped.
- 23mm (IIRC) front sway bar for a 924. Won't bolt to a 944.
- "Idle up" valve for early cars equipped with AC. The one that bolts behind the airbox.


Stuff for cheap + shipping:
- Early oil pan. JUST had it ultrasonically cleaned which cost most of my asking price, you could eat off of it. Clean as new. Doesn't have the plastic insert so you'd have to transfer yours in. $40 + shipping OBO
- Alternator. From a 40k car. Untested but I'll make sure it tests good before shipping. $25 + shipping OBO.
- NA clutch fork. 2 available, 931 p/n, no abnormal wear. $25 + shipping OBO
- 2 sets of front bumper pads, from a USDM NA car.
- Set of NA injectors. 40k on them, car sat for 17 years, will probably need to be flow matched and will definitely need seals. $40 for the set.
- 951 cycling valve. Visually in good shape but I have no way to confirm functionality. $5
- Early NA fuel rail from a 1982 car. Has FPR and FPD installed. $20


Proceeds go toward even more car parts

 

How many late 944/951 FPR and FPD do you have?

 

I have at least 1 late 2.5 bar FPR, maybe 2. Same for FPD. I don't think the FPR is Bosch, it's SMP if I remember right but is fine.

 

Is the intake manifold from an '83 or some other year?

 

How many do you need, Spencer?

What...you're refurbing and reselling FPRs/FPDs to South America now?

 

It's from a 1983 car, with a mid-year 1982 build date. It looks identical to the intake in my actual 1983 build car as far as I can visually tell.

 

I'll take as many pairs as you have...let me know shipping cost, I'm guessing medium USPS flat rate?

 

PM sent

 

All PMs replied... I may be slow on shipping because work is super busy right now, but I'll get them out when I can.

 

I'd be interested in the front bumper shocks.

 

Michael..do you have an early front valence that is extra? Let me know..thanks.

 

Sorry for late replies gents, weekend got really busy. I've updated the OP with what's left, and found some stuff to include. Hopefully it's useful to people on here.

V2, I'll ship you what I have. Last I looked, 1 of each for a late car. FPR is low miles but isn't OEM Bosch.

The shocks are all spoken for, sorry.

Sorry, don't have one. Unless you're interested in a 951 bumper conversion

(I didn't list it because I've listed it in a lot of other places. But if anyone is interested let me know.)

 

Tiger,

Do you mean this? If so, it's yours if you want it. Some of the plastic needs to be straightened out but it's all there. PM me if your interested.

 

I take throttle body , and header and injector if available . 60175 zip code

 

Do tell , I am possibly interested .