Cleaning out the basement - 944 Parts
#1
Racer
Thread Starter
Cleaning out the basement - 944 Parts
After 10 years of racing 944s, it’s time to clean out some spares. I’ve got a ton of stuff, highlights including:
• 2.5L engine w/ euro engine and Miledge cam; 151RWP
• 2.5L head by Kelly Moss, recently freshened
• 2.5L head by Gellner engineering, used
• 2.5L block with pistons & balance shafts in good shape
• Alternators, water pumps, rods, cam towers and other engine parts
• Aluminum front a-arms (late offset, 944/944s/968)
• Turbo rear trailing arms
• Full carpet set, black
• Passenger seat
• Torque tube
• Torsion bars
• Over 100 other items (found so far as I clean out the basement!)
Was thinking for asking price, either 50% of new price or 75% of used price from a dismantling house.
Shoot me an PM or email me at christiancook43(at)yahoo(dot)com if you’re looking for something.
Also, I have a complete list of items (albeit still growing) with part numbers that I can provide.
• 2.5L engine w/ euro engine and Miledge cam; 151RWP
• 2.5L head by Kelly Moss, recently freshened
• 2.5L head by Gellner engineering, used
• 2.5L block with pistons & balance shafts in good shape
• Alternators, water pumps, rods, cam towers and other engine parts
• Aluminum front a-arms (late offset, 944/944s/968)
• Turbo rear trailing arms
• Full carpet set, black
• Passenger seat
• Torque tube
• Torsion bars
• Over 100 other items (found so far as I clean out the basement!)
Was thinking for asking price, either 50% of new price or 75% of used price from a dismantling house.
Shoot me an PM or email me at christiancook43(at)yahoo(dot)com if you’re looking for something.
Also, I have a complete list of items (albeit still growing) with part numbers that I can provide.
#2
Rennlist Member
how are the bearings in the torque tube?
#5
Racer
Thread Starter
how are the bearings in the torque tube?
-Great shape. Spun the the shaft this AM and it's effortless with no play
What are the details of the Kelly Moss head and what price are you asking?
-decked and ported; recently refreshed by Gellner Engineering in Cleveland and assembled by Steinels Autowerks with 951 springs; never intalled since refreshed.
Set of early injectors?
-All my injectors came from '88 motors. Happy to post pics if that would be helpful, let me know.
-Great shape. Spun the the shaft this AM and it's effortless with no play
What are the details of the Kelly Moss head and what price are you asking?
-decked and ported; recently refreshed by Gellner Engineering in Cleveland and assembled by Steinels Autowerks with 951 springs; never intalled since refreshed.
Set of early injectors?
-All my injectors came from '88 motors. Happy to post pics if that would be helpful, let me know.
Trending Topics
#9
Racer
Thread Starter
I am in need of a set of good 8v lifters for my 951.
-Got a set in a cam-tower / case that are used, but good. Want me to shoot you some pics?
Is the carpet set in good condition?
-Yep, new and never installed. Rolled it out this AM to check condition and all pieces are there. Looks great, assuming you like black!
What size torsion bars?
Tosion bars are 31mm hollow
-Got a set in a cam-tower / case that are used, but good. Want me to shoot you some pics?
Is the carpet set in good condition?
-Yep, new and never installed. Rolled it out this AM to check condition and all pieces are there. Looks great, assuming you like black!
What size torsion bars?
Tosion bars are 31mm hollow
#10
Racer
Thread Starter
Fotgot to add, shoot me a PM or christiancook43(at)yahoo(dot)com with your email and i'll shoot you the list i've pulled together so far (still have boxes to go through....)
#13
Race Car
I am in need of a set of good 8v lifters for my 951.
-Got a set in a cam-tower / case that are used, but good. Want me to shoot you some pics?
Is the carpet set in good condition?
-Yep, new and never installed. Rolled it out this AM to check condition and all pieces are there. Looks great, assuming you like black!
What size torsion bars?
Tosion bars are 31mm hollow
-Got a set in a cam-tower / case that are used, but good. Want me to shoot you some pics?
Is the carpet set in good condition?
-Yep, new and never installed. Rolled it out this AM to check condition and all pieces are there. Looks great, assuming you like black!
What size torsion bars?
Tosion bars are 31mm hollow
thanks
#15
Racer
Thread Starter
What color is the passenger seat as well as condition? Is it an NA seat?
-It's a black NA seat, with a small tear on the back where the a roll bar rubbed it. Will post a photo tomorrow when back at the shop.
-It's a black NA seat, with a small tear on the back where the a roll bar rubbed it. Will post a photo tomorrow when back at the shop.