88 924s + 84 944 parting 2 the Bones
11-24-2011, 11:42 PM
#16
Rennlist Member
I'd be interested in the '88 pistons if they are not damaged, or worn excessively. If they are not the original 10.2:1 pistons, not interested, though. Also the '88 DME.
11-25-2011, 12:10 AM
#17
Racer
Thread Starter
Join Date: Apr 2011
Location: NC
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
88 924s I have a local on the same page as you are.. He snatched the DME last week off ebay and is asking about the pistons too. Let me get the head off and get back at you.
Since I have your attention The recent 84 944 I picked up has the M220 40 % lsd trans is that something you SPEC racers may be interested in? you can PM me.
Since I have your attention The recent 84 944 I picked up has the M220 40 % lsd trans is that something you SPEC racers may be interested in? you can PM me.
Last edited by kens_74911s; 11-25-2011 at 12:36 AM.
11-25-2011, 08:11 AM
#18
Rennlist Member
correct, i need the yellow units for my 944. also looking for a washer fluid pump and the opposite end connectors with a few inches of wiring that go to the pump's connectors that i can solder in
11-25-2011, 02:14 PM
#20
Racer
Thread Starter
Join Date: Apr 2011
Location: NC
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
87 blue 944 chassis SOLD
The 87 944 Blue sold last year for $500 - I posted it as an example. Ian out of Charlotte looked to be thinking about doing a 924 GTS look car and was asking about the 88 924s chassis. I could do the 924s to be just like that for the same money, but put 944 FT fenders and a 944 air dam on it. As mensioned the 924S does have a clear NC title signed and notarized just put in a buyer name.
Also,
I have a deal in the works where I will pick up a large LOT of 88 944 parts including,Ft Fenders, DME, 5Spd trans, loaded doors (w/black panels), FT & RR susp including late offset 5 lug hubs FT and rear, FT and RR Calipers etc.
Also,
I have a deal in the works where I will pick up a large LOT of 88 944 parts including,Ft Fenders, DME, 5Spd trans, loaded doors (w/black panels), FT & RR susp including late offset 5 lug hubs FT and rear, FT and RR Calipers etc.
11-27-2011, 11:04 PM
#22
Racer
Thread Starter
Join Date: Apr 2011
Location: NC
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
pm me and I will link you to my photobucket for this for the images
Ken
11-27-2011, 11:31 PM
#23
Racer
Thread Starter
Join Date: Apr 2011
Location: NC
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
11-28-2011, 12:27 AM
#24
Today I got
My Custom Title
Rennlist Member
My Custom Title
Rennlist Member
