IGROWL

I did the NA to Turbo bumper conversion over the weekend but now I do not have any turn signals in the front of the car. I searched and did not see an answer to this one.

The parking/turn signals on the Turbo bumper lights have three wires - Brown, Blue, and White with Yellow Stripe. The wiring harness on a NA car has on the driver side three wires - Brown, Black with White Stripe, and White with Black stripe. On the passenger side it is Brown, Dark green and Grey with Red stripe. I matched all the Brown wires together. I have been swapping the other colors around and still no blinkers in front but the back blinkers have always been OK since the conversion.

Since many have done this conversion already any thoughts or how did you match the wiring colors together and blinkers work.

Thanks

V2Rocket

Just did this on Friday. You may have the same situation I did though; the blinker filament on the bulb might be broken...lol

IGROWL

Spencer I was waiting for either you or Mark to chime in on this one.

This morning when I was typing this I thought I hope it's not the bulb and went out and pulled the bulbs and everything was good and both filaments on each bulb were there and solid.

IGROWL

Anyone else convert their NA bumper to Turbo and remember the color of the wires they connected together for the running/blinker light above the fog?