Feeler FS Jaguar AWIC
#1
Rainman
Rennlist Member
Rennlist Member
Thread Starter
Feeler FS Jaguar AWIC
I bought some time ago a nice condition air-water intercooler originally off a Jaguar XJR-6 with the hopes of using it for my SC project. However, depending on how my mount comes out (based on available engine bay space) I am unsure about using the Jaguar intercooler simply due to sheer size. The blower is quite large so real estate is at a premium.
It is a nice piece, still in good shape internally (fins are straight). I did cut off the 6 Jaguar runners but left some material left on that side for further modification, but that shouldn't be a problem for you guys. The inlet side is still factory. Does not leak. Has a hole on the underside after the core for an air temp sensor that I'd include. Hose barbs are about 5/8" so lots of waterflow. This would be an interesting addition for a 951 or a 944 centrifugal supercharger project.
It is a nice piece, still in good shape internally (fins are straight). I did cut off the 6 Jaguar runners but left some material left on that side for further modification, but that shouldn't be a problem for you guys. The inlet side is still factory. Does not leak. Has a hole on the underside after the core for an air temp sensor that I'd include. Hose barbs are about 5/8" so lots of waterflow. This would be an interesting addition for a 951 or a 944 centrifugal supercharger project.
Last edited by V2Rocket; 07-12-2011 at 09:52 PM.