K26/6 to K26/8 question?
#1
Rennlist Member
Thread Starter
K26/6 to K26/8 question?
Hey guys I was wondering what's need to convert from a k26/6 to a k26/8?
I know the turbo
And gaskets for the turbo
Is there any modification needed to mount the baby or is the original piping and such usable?
Thanks a lot...
I know the turbo
And gaskets for the turbo
Is there any modification needed to mount the baby or is the original piping and such usable?
Thanks a lot...
#3
Rennlist Member
Use your special tool.
Here is your description of it:
This worked for me... I got a special tool... you may call it a brick but I prefer an "unlocking apparatus" or the U.A. Tool for short....
Here is your description of it:
This worked for me... I got a special tool... you may call it a brick but I prefer an "unlocking apparatus" or the U.A. Tool for short....
#7
Addict
Rennlist Member
Rennlist
Small Business Partner
Rennlist Member
Rennlist
Small Business Partner
The DME chip isn't significantly different - not enough to worry about.
The 86-78 DME is 24pin, the 88-89 DME is 28pin (regardless if they were S cars or not).
-Rogue
The 86-78 DME is 24pin, the 88-89 DME is 28pin (regardless if they were S cars or not).
-Rogue
Trending Topics
#9
Addict
Rennlist Member
Rennlist
Small Business Partner
Rennlist Member
Rennlist
Small Business Partner
Original Powerhaus... But any of the decent shops should be able to do the conversion for you. Places like Majestic turbo, Gpopshop, ect.