Notices
924/931/944/951/968 Forum Porsche 924, 924S, 931, 944, 944S, 944S2, 951, and 968 discussion, how-to guides, and technical help. (1976-1995)
Sponsored by:
Sponsored by:

Throttle Respone Cam

Thread Tools
 
Search this Thread
 
Old 03-27-2003, 05:14 PM
  #1  
Chad S
Advanced
Thread Starter
 
Chad S's Avatar
 
Join Date: Mar 2003
Location: Atlanta, Ga
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Post Throttle Respone Cam

I just ordered a Throttle Response Cam and was wondering what it in tailed to install it.

Any one out there install one.
Old 03-27-2003, 05:17 PM
  #2  
schnellfahrer
Addict
Rennlist Member

 
schnellfahrer's Avatar
 
Join Date: Nov 2002
Location: right next to the right one
Posts: 2,486
Likes: 0
Received 1 Like on 1 Post
Post

Remove one nut - remove old throttle cam - install new throttle cam - reattach one nut.

Even I could do it.
Old 03-27-2003, 05:24 PM
  #3  
Chad S
Advanced
Thread Starter
 
Chad S's Avatar
 
Join Date: Mar 2003
Location: Atlanta, Ga
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Post

That easy? I thought you may have to cut the throttle cable.

Cool!
Old 03-27-2003, 05:30 PM
  #4  
Tom R.
Addict
Lifetime Rennlist
Member
 
Tom R.'s Avatar
 
Join Date: May 2001
Location: Mile High
Posts: 10,216
Received 122 Likes on 89 Posts
Post

that cam throws you into modified in metronypca.
Old 03-27-2003, 05:30 PM
  #5  
nixwiz
Instructor
 
nixwiz's Avatar
 
Join Date: Nov 2002
Location: Phoenix
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
Post

You definitely need to take the slack out of the throttle cable and possibly adjust the stop under your accelerator pedal. Which one did you order and from where....it should include instructions. If not, I could fax you mine.
Old 03-27-2003, 05:33 PM
  #6  
Chad S
Advanced
Thread Starter
 
Chad S's Avatar
 
Join Date: Mar 2003
Location: Atlanta, Ga
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Post

I got it from Performance Products.

<a href="http://www.performanceproducts.com/ProductPage.aspx?productname=Throttle+Response+Cam&productid=106212&prod ucttype=20" target="_blank">http://www.performanceproducts.com/ProductPage.aspx?productname=Throttle+Response+Cam&productid=106212&prod ucttype=20</a>
Old 03-27-2003, 05:40 PM
  #7  
Jfrahm
Addict
Rennlist Member

 
Jfrahm's Avatar
 
Join Date: Mar 2002
Location: Boulder, CO
Posts: 6,587
Likes: 0
Received 144 Likes on 129 Posts
Post

I don't get these, can't you just move your foot farther or faster? I never seem to have any trouble finding WOT :-)

-Joel.
Old 03-27-2003, 05:40 PM
  #8  
Ben Plaisted
Racer
 
Ben Plaisted's Avatar
 
Join Date: Nov 2002
Location: Portland, Maine
Posts: 467
Likes: 0
Received 0 Likes on 0 Posts
Post

Its really simple, I just had to adjust the throttle cable a little bit after I put it on and that was it. like schnellfahrer said "one nut off, one nut on" simple as that. good luck and enjoy.
Old 03-27-2003, 05:53 PM
  #9  
Dan Gallagher
Drifting
 
Dan Gallagher's Avatar
 
Join Date: Jun 2002
Location: Long Island, New York
Posts: 2,015
Likes: 0
Received 0 Likes on 0 Posts
Post

</font><blockquote><font size="1" face="Verdana,Tahoma,Helvetica">quote:</font><hr /><font size="2" face="Verdana,Tahoma,Helvetica">Originally posted by Tom R.:
<strong>that cam throws you into modified in metronypca.</strong></font><hr /></blockquote><font size="2" face="Verdana,Tahoma,Helvetica">??
Old 03-27-2003, 06:05 PM
  #10  
Mike S
Three Wheelin'
 
Mike S's Avatar
 
Join Date: Jun 2001
Location: San Jose, CA
Posts: 1,598
Likes: 0
Received 0 Likes on 0 Posts
Post

Really simple just check the stop under the pedal otherwise you'll stretch your cable or break it when you stomp the pedal down. I had to adjust mine about a 1/4" or so.

These don't add horsepower, but they do make the response a bit better....I like it on a 944, but onthe turbo its not so hot.
Old 03-27-2003, 07:32 PM
  #11  
Joe944
Racer
 
Joe944's Avatar
 
Join Date: Jan 2002
Location: Burlingame, California
Posts: 402
Likes: 0
Received 0 Likes on 0 Posts
Post

Hey I got one from Paragon and when I went to put it on just for looks ( intake is off right now) it wouldnt go on right all the way? It got stuck, I think the hole is a little too small =/ anyone else have these problems?
Old 03-27-2003, 07:33 PM
  #12  
Joe944
Racer
 
Joe944's Avatar
 
Join Date: Jan 2002
Location: Burlingame, California
Posts: 402
Likes: 0
Received 0 Likes on 0 Posts
Post

Hey I got one from Paragon and when I went to put it on just for looks ( intake is off right now) it wouldnt go on right all the way? It got stuck, I think the hole is a little too small =/ anyone else have these problems?
Old 03-28-2003, 04:13 PM
  #13  
gleamingred944
Instructor
 
gleamingred944's Avatar
 
Join Date: Jul 2002
Location: Ottawa Canada
Posts: 232
Likes: 0
Received 0 Likes on 0 Posts
Post

What this gizmo does is to change the pedal response from log to linear. With the Porsche system, each time you put your foot down a bit more, you get a bit more power. With the circular cams, you get a lot of power at the beginning, then almost none is left at the end.

Not only that, but (HERESY!) if you use the cruise control on 500km throughway drives, the cruise has problems at low power and tends to hunt.

I took mine out and put back the Porsche original. Like it much better.
Old 03-28-2003, 04:37 PM
  #14  
pete944
Addict
Lifetime Rennlist
Member
 
pete944's Avatar
 
Join Date: Nov 2001
Location: Dayton, Ohio
Posts: 7,262
Likes: 0
Received 0 Likes on 0 Posts
Post

</font><blockquote><font size="1" face="Verdana,Tahoma,Helvetica">quote:</font><hr /><font size="2" face="Verdana,Tahoma,Helvetica">Originally posted by gleamingred944:
Not only that, but (HERESY!) if you use the cruise control on 500km throughway drives, the cruise has problems at low power and tends to hunt.

I took mine out and put back the Porsche original. Like it much better.[/QB]</font><hr /></blockquote><font size="2" face="Verdana,Tahoma,Helvetica">I've got one and my cruise control is steady as a rock. Personally, I like the throttle cam. As cheap as they are it's worth trying. If you don't like it, someone here will buy it.
Old 03-28-2003, 04:42 PM
  #15  
Chad S
Advanced
Thread Starter
 
Chad S's Avatar
 
Join Date: Mar 2003
Location: Atlanta, Ga
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Post

Thanks for all of the review and tips.


Quick Reply: Throttle Respone Cam



All times are GMT -3. The time now is 05:30 PM.