When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Did someone get back with you about the orientation of the wires on the hall sensor? My car is under snow and a cover and my connector is all taped up, otherwise I would have checked my car for you.
Did someone get back with you about the orientation of the wires on the hall sensor? My car is under snow and a cover and my connector is all taped up, otherwise I would have checked my car for you.
i have tired all ways with the wires, i also just tested the coil..coil looks fine,but still no spark when u crank,i check the whole ignition system..
do you think the computer has to be bolted back on the metal frame and in the car in order to work fine? because i just connected mine and left it there on passenger floor..
at first a while ago,i was getting only one spark,but i noticed this bolt was loose,so i tightened it,and i think thats when the spark did not come back at all
That looks like a main ground to the back of the engine block. Try to get in there to loosen it up again and clean up the connection, then tighten it. I know it is a small spaced in there to work with but any loss of grounding can lead to unexpected problems.