paging CPR....
#2
Rainman
Rennlist Member
Rennlist Member
i took control of the plane, flew it to my house and am currently holding him hostage in my garage until he makes the perfect 968 spoiler for my car along with a euro-look bumper front and rear and a rear valence.
he'll be free in a few weeks
he'll be free in a few weeks
#3
Burning Brakes
You...did...remember to feed him, right?
Right?
#5
No, not Mosquito!
Rennlist Member
Rennlist Member
Hey Spencer, for the sake of COOL you may want to capture me as well to do a dash swap and maybe capture someone else on these boards to do a paint job for you. ::
#6
Rainman
Rennlist Member
Rennlist Member
besides the early dash looks really good if its done up in a good leather cover...
but if you want to fly out here and do it feel free.
#7
No, not Mosquito!
Rennlist Member
Rennlist Member
paintjob could be useful. but i actually like the early dash. certainly the later dash is good looking and more modern but i appreciate my car being very simple and purpose-built. there are no frills to the early dash and i like that.
besides the early dash looks really good if its done up in a good leather cover...
but if you want to fly out here and do it feel free.
besides the early dash looks really good if its done up in a good leather cover...
but if you want to fly out here and do it feel free.
Or... hey, would you like to do a black interior swap? I have all the pieces!
Trending Topics
#9
No, not Mosquito!
Rennlist Member
Rennlist Member
#11
No, not Mosquito!
Rennlist Member
Rennlist Member
#13
Race Director
Sorry HR...I was in Europe when this thread was posted. In case you haven't been following this on the 951 Forum here is the update:
1.951 V1 is currently in production and we will begin receiving these units in house on Jan.29th
2. 951 V3(race version) enter production Feb. 18th with units in house by the 24th.
3. NA units enter production Feb 23rd with delivery by the 26th.
I had some issues in Oct/Nov of last year with suppliers, equipment and one mold issue. These have all been reconciled and (finally!) everything is back on track.
Sorry for the delay in responding to this thread....Spence just let me out last week.
1.951 V1 is currently in production and we will begin receiving these units in house on Jan.29th
2. 951 V3(race version) enter production Feb. 18th with units in house by the 24th.
3. NA units enter production Feb 23rd with delivery by the 26th.
I had some issues in Oct/Nov of last year with suppliers, equipment and one mold issue. These have all been reconciled and (finally!) everything is back on track.
Sorry for the delay in responding to this thread....Spence just let me out last week.
#15
Racer