Parting out my 1983 Porsche 944
#16
Rennlist Member
Thread Starter
Join Date: Dec 2005
Location: North VA
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
#19
Rennlist Member
Thread Starter
Join Date: Dec 2005
Location: North VA
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here are some pics of the car and some random parts off it. Those seats are pretty new, the floormats are official Lloyds mats, and the picture of blackness is actually the carpet inside the car.
Let me just say that the rolling chassis comes with a like-new bilstein sport suspension, an a/c system with a newly rebuilt compressor and reciever drier; and it blows cold (was charged with R12 right before the rod bearing spun). The weather stripping is all new, and so is the gasket around the sunroof. The paint was stripped down from black, brought down to bare metal, and was brought back up to gaurds red with some minor bodywork (door dings, etc) and many coats of primer. This car was wet sanded, there is no clear coat to worry about flaking. Also included with the chassis is a transmission, c/v joints, brakes, and if you need anything else then jump on it soon so I don't sell something you need.
There are tons of parts left folks, including all the engine stuff.
Let me just say that the rolling chassis comes with a like-new bilstein sport suspension, an a/c system with a newly rebuilt compressor and reciever drier; and it blows cold (was charged with R12 right before the rod bearing spun). The weather stripping is all new, and so is the gasket around the sunroof. The paint was stripped down from black, brought down to bare metal, and was brought back up to gaurds red with some minor bodywork (door dings, etc) and many coats of primer. This car was wet sanded, there is no clear coat to worry about flaking. Also included with the chassis is a transmission, c/v joints, brakes, and if you need anything else then jump on it soon so I don't sell something you need.
There are tons of parts left folks, including all the engine stuff.
#20
Rennlist Member
Thread Starter
Join Date: Dec 2005
Location: North VA
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Bump for the pictures and I need to get this gone, who else needs parts? Come on I have an entire brand new engine rebuild kit including a clutch kit, a new oil pump, all gaskets, two cranks, two blocks, 2 sets of forged pistons. I also have a ton of other new/nearly new parts. Too much to list. Let me know what you need because I need the room and the dinero to work on my other car. Thanks, -Chris
#21
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
How about the windshield washer hoses?
Basically I need everything but the tank and pump.... all hoses, tank lid, the plastic elbows that go through the lid, and the pickup hose.
Let me know. Thanks
Basically I need everything but the tank and pump.... all hoses, tank lid, the plastic elbows that go through the lid, and the pickup hose.
Let me know. Thanks
#26
Rennlist Member
Thread Starter
Join Date: Dec 2005
Location: North VA
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
With the flawless A/C system, the new bilstein sport struts, newer paint/body seals, perfect glass and brakes, we would like to get $1000 for the entire thing.
Edit: the trans and all other drivetrain parts are still in it too (C/V joints etc)
Edit: the trans and all other drivetrain parts are still in it too (C/V joints etc)
Last edited by barelyrunshalfthetime; 06-30-2008 at 11:31 PM.
#27
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
all for an early car:
front flare braces (one plastic for drivers side, one metal for passenger side)
MANUAL FLYWHEEL: EARLY CAR
WINDSHIELD
EARLY CAR BATTERY TRAY
pass door handle early handle i only need the threaded pop on piece if you're willing to part.(brown on my caR)
FRONT CORNER TURN HOUSINGS AND 1 LENS
plugs screws
let me know what you have.
BATTERY HOLD DOWN
oval vent in door jamb
cheap rebuidable torque tube?<<<<only possibly.
cheap rebuidable clutch slave?
front flare braces (one plastic for drivers side, one metal for passenger side)
MANUAL FLYWHEEL: EARLY CAR
WINDSHIELD
EARLY CAR BATTERY TRAY
pass door handle early handle i only need the threaded pop on piece if you're willing to part.(brown on my caR)
FRONT CORNER TURN HOUSINGS AND 1 LENS
plugs screws
let me know what you have.
BATTERY HOLD DOWN
oval vent in door jamb
cheap rebuidable torque tube?<<<<only possibly.
cheap rebuidable clutch slave?